Thanks for all the responses. I already have two round tanks (4" PVC X 10"long) connect together via a pipe. The vacuum pump is fairly quiet now that I have made a insulated box both outside and inside with a hole for air. It is rubber mounted both the pump to the box and the box to the frame. The vacuum switch I have now is too sensitive and I prefer a long draw every three to 4 brakes to a short burst every time I touch the brakes. I have ordered a switch to try and if it does what I want I will post the results later.
Thanks to all for the advice, Buddy -----Original Message----- From: EV [mailto:[email protected]] On Behalf Of Lawrence Rhodes via EV Sent: Monday, September 15, 2014 7:02 PM To: [email protected]; [email protected] Subject: Re: [EVDL] Vacuum Switch You don't want to make more pressure. You could use a larger vessel for your vacuum buffer. If you go higher in pressure you will shorten the life of your pump. Lawrence Rhodes -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20140915/4fc94da4 /attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA) _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
