On 16 Aug 2021 at 14:40, Robert Bruninga via EV wrote: > Though, I bet they have sensing at the 24 and 36v taps to control > charging and those taps will not exist.
No sensing - they're not that sophisticated! The smaller tractors - ER8-36, E8, E10 - don't have a lift or lights, so it's not a problem. The large frame tractors have battery taps for the lights (12v) and for the electric front implement lift (18v). The lights can be swapped out for LEDs to run at the full voltage. I run my lift at 24v and I know of at least one person who has it at 36v (that might be a bit high). You could run a 42v system with a tap at 16.8v or possibly 25.2v for the lift. David Roden, EVDL moderator & general lackey To reach me, don't reply to this message; I won't get it. Use my offlist address here : http://evdl.org/help/index.html#supt = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = A pioneer wanted to cut a tree down that didn't cost him any- thing, but he never did plant one. He wanted to plow up land that should have been left to grass. He thought it was nature he was living off of, but it was really future generations he was living off of. -- Will Rogers = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = _______________________________________________ Address messages to [email protected] No other addresses in TO and CC fields UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub ARCHIVE: http://www.evdl.org/archive/ LIST INFO: http://lists.evdl.org/listinfo.cgi/ev-evdl.org
