Re: [Evolution] Sony Clie no longer recognized by gpilotd

[Ron Hauptfleisch]

I have a Clie SJ22 and I am running Evo 1.4.3 under RH 8.  I can make my Clie work only by doing the following:

1. Tools->Pilot Settings.    This seems to prime gpilotd.
2. Sync the Clie.  It will fail, but don't interrupt it or you will have to do this step over.
3. Sync the Clie.  This time it will work.

This behavior totally repeatable, 100% of the time.

The Clie also behaved this way under the previous version of Evolution.

-- ron


On Mon, 2003-07-14 at 06:38, Stephen Witkop wrote:

On Sun, 2003-07-13 at 16:41, Richard Zach wrote:
> I'm having a weird problem where my Clie NR70 is no longer recognized by
> gpilotd.  It all worked before I upgraded to Evo 1.4.3, but maybe
> something else broke in the last two weeks.  pilot-xfer works fine,
> syslog reports the Clie when I press the hotsync button, gpilotd is
> "watching the cradle" but just doesn't do anything when I hotsync.  The
> pilot setup applet also can't get the SyncID and username from the
> pilot.
> 

Sounds like the same problem I have (see my earlier post). Try starting
gpilotd after you press the hotsync button, that worked for me.

-- 

Ron Hauptfleisch <[EMAIL PROTECTED]>