Better if GC replicate over the link than the Exchange servers hammering the link whenever they need to contact a GC.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, November 09, 2004 10:19 AM To: Exchange Discussions Subject: RE: ADC connection agreement I am concerned with the GCs replicating over the link and having to possibly have another DC in place to host the GC. Cost maybe being an issue there. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Chris Scharff Sent: Tuesday, November 09, 2004 9:13 AM To: Exchange Discussions Subject: RE: ADC connection agreement Exchange 200x needs to communicate with GCs. If you're planning to install Exchange into the remote site, it would seem to make more sense for it to communicate with one in the site rather than over a satellite link for each directory lookup it wants to do. -- Chris Scharff Messaging Services Architect MessageOne [o] 512.652.4500 x244 [m] 512.560.2984 [f] 512.652.4504 > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of [EMAIL PROTECTED] > Posted At: Tuesday, November 09, 2004 7:38 AM > Posted To: swynk > Conversation: ADC connection agreement > Subject: FW: ADC connection agreement > > > Little update. I am using ADC from ex2ksp3. Deploying Ex2k. > Further information: This ADC agreement is between Exchange > 5.5SP4/DC that resides in a child domain. The only CGs I > have are in the parent domain. I have figured out that these > 8 accounts would not replicate because the 'Manager field in > their mailboxes has a mailbox from the parent domain. When I > removed this Manager the account and mailbox replicate. I > have found if I promote the Domain Controller in the child > domain to a CG this resolves the issue. > > I have 13 remote Exchange 5.5SP4 sites (Satellite links) in > their own Win2k domains. These are single Servers hosting > Exchange and DC. I have done a lot of reading and understand > that I can't make all these servers GCs and that it is > necessary to have one GC in each domain that Ex2k is > installed in? Not to mention the added Network traffic. > > Can this work in my present configuration. Any help or > pointers much appreciated. > > Mort Billups > Crowley Maritime Corporation > > -----Original Message----- > From: Billups, Morton > Sent: Thursday, November 04, 2004 7:39 AM > To: 'Exchange Discussions' > Subject: RE: ADC connection agreement > > > Yes, many many times. > Yes, lost count how many times. > Yes, as stated 8022 and 8070 description below. > > I have made some progress. As stated below 8 of 143 mailboxes and 2 > DLs would not replicate. What I have discovered is if the mailbox > manager's field is modified with a mailbox from another Site > replication will fail. > If the DL has a member from another site replication will fail. > I don't know why this is happening yet, but I feel a little closer to > solving it. > So that is where my focus is currently. Thanks again for your reply. > > PS.. If anyone wants to know how I troubleshot this I'll try > to describe it. > > > Mort Billups > Crowley Maritime Corporation > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Ed > Crowley [MVP] > Sent: Wednesday, November 03, 2004 9:34 PM > To: Exchange Discussions > Subject: RE: ADC connection agreement > > > Have you verified that the ADC is running? Have you changed > an attribute on > a properly connected mailbox and watched to see if it gets > reflected on the > other side? Have you looked at the event log for any errors > on the server > on which the ADC is running? > > Ed Crowley MCSE+Internet MVP > Freelance E-Mail Philosopher > Protecting the world from PSTs and Bricked Backups!T > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Wednesday, November 03, 2004 4:24 AM > To: Exchange Discussions > Subject: RE: ADC connection agreement > > They are all in the default Recipient container. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf > Of Ed Crowley > [MVP] > Sent: Tuesday, November 02, 2004 6:38 PM > To: Exchange Discussions > Subject: RE: ADC connection agreement > > > That means that the ADC should try to replicate them. It'll > skip ones that > have the ADC-Global-Names attribute filled in. These > mailboxes aren't in a > different container, are they? > > Ed Crowley MCSE+Internet MVP > Freelance E-Mail Philosopher > Protecting the world from PSTs and Bricked Backups!T > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Tuesday, November 02, 2004 12:15 PM > To: Exchange Discussions > Subject: RE: ADC connection agreement > > Thanks for replying! Since my last post I tried to do that, > but when viewing > the raw properties of the mailbox the ADC-Global-Names > attributes are not > set (blank). You can only see the object ADC-Global-Names if > the view is set > to ALL. > > I have also reinstalled the ADC (ex2ksp3 flavor), but I same results. > > Probably related is 2 DL won't replicate to AD. A new DL will > replicate just > fine. > > Still digging! > > Mort Billups > Crowley Maritime Corporation > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf > Of Ed Crowley > [MVP] > Sent: Tuesday, November 02, 2004 1:27 PM > To: Exchange Discussions > Subject: RE: ADC connection agreement > > > I see what you're trying to do. Start Exchange 5.5 > Administrator in Raw > Mode (admin /r). Open the raw properties of each disconnected mailbox > (Shift-Enter) and remove the ADC-Global-Names attribute. The > next time the > ADC runs it should create a new disabled user or connect the > mailbox to the > corresponding AD user. > > Ed Crowley MCSE+Internet MVP > Freelance E-Mail Philosopher > Protecting the world from PSTs and Bricked Backups!T > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Monday, November 01, 2004 11:15 AM > To: Exchange Discussions > Subject: RE: ADC connection agreement > > I don't think I can do that. I don't have any E2k servers > running. If I can > ever figure out this problem maybe I'll get to install one? I > am just tying > to get these 8 Ex5.5 mailboxes synchronize with their AD > accounts. I have 12 > other remote Ex5.5 sites so I want to get this working > correctly before > proceeding. > > Mort Billups > Crowley Maritime Corporation > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf > Of Ed Crowley > [MVP] > Sent: Monday, November 01, 2004 1:44 PM > To: Exchange Discussions > Subject: RE: ADC connection agreement > > > In ESM under the mailbox store list the mailboxes. > Right-click one and > select to Reconnect. > > Ed Crowley MCSE+Internet MVP > Freelance E-Mail Philosopher > Protecting the world from PSTs and Bricked Backups!T > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Monday, November 01, 2004 4:20 AM > To: Exchange Discussions > Subject: RE: ADC connection agreement > > Thanks for the reply. I did remove the Exchange attributes > and restarted the > ADC. > That didn't work unfortunately. What exactly does > reconnecting a mailbox > mean? > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf > Of Mike Lagase > Sent: Friday, October 29, 2004 7:16 PM > To: Exchange Discussions > Subject: Re: ADC connection agreement > > > Try removing the Exchange attributes for one user and then > reconnecting that > > mailbox to the AD user. See if that then replicates properly. > > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: "Exchange Discussions" <[EMAIL PROTECTED]> > Sent: Friday, October 29, 2004 2:19 PM > Subject: ADC connection agreement > > > > Hi, > > > > I have one ADC two way connection agreement setup to > replicate users > > and mailboxes. There are 8 users/mailboxes that won't > > synchronize/replicate out of 143 users in this site. None of these > > mailboxes/accounts have ADC-Global-Names or msExchADCGlobalNames. > > Event gives an 8022 and 8070 error which states that LDAP > modify fails > > because "No Such Object' exist. I am running Ex5.5sp4 and Win2ksp4 > > Native. I have upgraded ADC to Ex2k3sp1, recreated the agreements > > and done a lot of swearing so far. So far I haven't been able to > > duplicate this in my Lab. > > > > I have two other Exchange 5.5 Sites with ADCs setup. They > are working > > just fine. The only obvious difference to me is that the > third site's > > accounts are in a child AD domain. > > > > I would appreciate any suggestions. I poor head hurts from > reading so > > many KB articles and searching the Web. > > > > Mort Billups > > Crowley Maritime Corporation > > > > _________________________________________________________________ > > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > > Web Interface: > > > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange > To unsubscribe send a blank email to > [EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > To unsubscribe via postal mail, please contact us at: > Jupitermedia Corp. > Attn: Discussion List Management > 475 Park Avenue South > New York, NY 10016 > > Please include the email address which you have been contacted with. > > > _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with.
