However, you might want two routing groups if both sites have their own Internet connections and you don't want Internet traffic routed over the inter-site link.
Ed Crowley MCSE+Internet MVP Freelance E-Mail Philosopher Protecting the world from PSTs and Bricked Backups!T -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andy Blevins Sent: Monday, May 15, 2006 6:29 AM To: Exchange Discussions Subject: RE: POSSIBLE SETUP FOR EXCHANGE OVER WAN? In the case of a 2mb connection between the two sites you don't need to have two routing groups. Microsoft considers anything over 256mb to be a "well-connected" site. You can leave the standard single routing group if you really have that 2mb pipe. This will make it a piece of cake. Just install another exchange 2003 server at that remote site, and then either move the mailboxes for these users to that site if they are already in Exchange, or create their mailboxes on the new server. Good luck! :-) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Evan Mann Sent: Monday, May 15, 2006 9:24 AM To: Exchange Discussions Subject: RE: POSSIBLE SETUP FOR EXCHANGE OVER WAN? There probably is, but it was pretty issue for me to figure out on my own. I created 2 routing groups and assigned the servers from each site as members to that routing group. In each group I created a routing group connector. On the general tab specify which routing group that connector will connect with (your opposite routing group obviously) and you can specify individually the server that can send mail over the routing group connector, or leave it to "any local server". On the remote bridgehead tab in the connector, specify the opposite server. I think that would cover everything. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kondilis Paul Sent: Monday, May 15, 2006 9:06 AM To: Exchange Discussions Subject: RE: POSSIBLE SETUP FOR EXCHANGE OVER WAN? SUPER...... Scenario b sounds like what I'm looking 4. Is there any kb out there on the 2 site exchange setup with the connectors? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Evan Mann Sent: Monday, May 15, 2006 3:55 PM To: Exchange Discussions Subject: RE: POSSIBLE SETUP FOR EXCHANGE OVER WAN? There are a couple of ways to handle it. You can setup Exchange(RPC) over HTTP and let the users is location B connect to the servers in location A via that method. No need for additional hardware, and as long as you have Exchange 2003 and Outlook 2003, it's easy to do. You can setup a second sever in location B which holds the mailboxes of users in location B, keeping all their mail itself local. Setup routing group connectors between servers in A and B so they can communicate. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kondilis Paul Sent: Monday, May 15, 2006 8:39 AM To: Exchange Discussions Subject: RE: POSSIBLE SETUP FOR EXCHANGE OVER WAN? Hey Guys, I know I've asked this before I think, but I was not to sure about the answer. I'm running an exchange 2003 server in location A, but would like my clients in location B to access it as well. There is a 2 MB link between them. Is there such a scenario where I can setup 2 exchange boxes on each location, and have data replicate or move between them, or control traffic between users in location A & B? I heard something about adding another exchange server to my existing organization, and I'm guessing I will just have to point users the respective server in their physical location? Thanks Paul **********Disclaimer:**************** The information in this e-Mail is confidential and intended solely for the person to whom it is addressed. If this message is not addressed to you, please be aware that you have no authorization to read the rest of this e-Mail, to copy it or to furnish it to any person other than the addressee. Should you have received this e-mail by mistake, please bring this to the attention of the sender, after which you are kindly requested to destroy the original message. The Papistas Group of Companies cannot be held responsible or liable in any way whatsoever for and/or in connection with any consequences and/or damage resulting from the proper and complete dispatch and receipt of the content of this e-Mail. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with.
