Try moving mailboxes in small groups of 20-30. Then check database
consistency. I have seen the move cure corruption problems. I think you will
be pleasantly surprised. A 20MB mailbox takes about 3-5 minutes, in my
experience, over a similar LAN.
Michael Herrick
Groton CIT Messaging Services
[EMAIL PROTECTED]
-----Original Message-----
From: Tom Meunier [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 25, 2001 9:17 AM
To: Exchange Discussions
Subject: RE: Move Mailbox Transfer Rate
No, that was by selecting 850 mailboxes and moving them all. One by
one? Heh. Someone's a glutton for punishment.
> -----Original Message-----
> From: Sander Van Butzelaar [mailto:[EMAIL PROTECTED]]
> Posted At: Tuesday, September 25, 2001 07:10 AM
> Posted To: MSExchange Mailing List
> Conversation: Move Mailbox Transfer Rate
> Subject: RE: Move Mailbox Transfer Rate
>
>
> Thanks Tom
>
> That was doing one by one right? Not using exmerge.
>
> Regards
>
> Sander
>
> -----Original Message-----
> From: Tom Meunier [mailto:[EMAIL PROTECTED]]
> Sent: 25 September 2001 02:01
> To: Exchange Discussions
> Subject: RE: Move Mailbox Transfer Rate
>
>
> Search the archives of this list, Ed Crowley asked people to
> report this
> info to him. About a month ago, I'd say. I don't know how
> many people
> forwarded off-site, and it was never determined how a high or low SIS
> ratio affected the move rate, but he may have his results in compiled
> form. My answer to him was that I did a 16gb store overnight.
>
> -----Original Message-----
> From: Sander [mailto:[EMAIL PROTECTED]]
> Posted At: Tuesday, September 25, 2001 7:00 AM
> Posted To: MSExchange Mailing List
> Conversation: Move Mailbox Transfer Rate
> Subject: Move Mailbox Transfer Rate
>
>
> Hi All
>
> I know one should not generalise and each system is different. I
> acknowledge these two factors, but does anyone have any stats on the
> average transfer speed they obtained while doing a move mailbox. The
> servers in question are not in my site so I cannot quickly run a test.
> The servers are on a 100 MB switch.The total mail store is
> approx 40 GB.
> I would like to calculate an approx time needed to move mailboxes this
> way, exmerge is not an option as the original store has corruptions in
> it. I need to check after each mailbox if the new store is still
> consistent.
>
> Any info is appreciated.
>
> Regards
> Sander
>
> _________________________________________________________________
> List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
> Archives: http://www.swynk.com/sitesearch/search.asp
> To unsubscribe: mailto:[EMAIL PROTECTED]
> Exchange List admin: [EMAIL PROTECTED]
>
> _________________________________________________________________
> List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
> Archives: http://www.swynk.com/sitesearch/search.asp
> To unsubscribe: mailto:[EMAIL PROTECTED]
> Exchange List admin: [EMAIL PROTECTED]
>
> _________________________________________________________________
> List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
> Archives: http://www.swynk.com/sitesearch/search.asp
> To unsubscribe: mailto:[EMAIL PROTECTED]
> Exchange List admin: [EMAIL PROTECTED]
>
_________________________________________________________________
List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe: mailto:[EMAIL PROTECTED]
Exchange List admin: [EMAIL PROTECTED]
LEGAL NOTICE
Unless expressly stated otherwise, this message is confidential and may be privileged.
It is intended for the addressee(s) only. Access to this E-mail by anyone else is
unauthorized. If you are not an addressee, any disclosure or copying of the contents
of this E-mail or any action taken (or not taken) in reliance on it is unauthorized
and may be unlawful. If you are not an addressee, please inform the sender immediately.
_________________________________________________________________
List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe: mailto:[EMAIL PROTECTED]
Exchange List admin: [EMAIL PROTECTED]
