Neil has it right, however - '*@*' more closely matches the target address, so the connector with which that is associated will be chosen every time.
------------------------------------------------------ Roger D. Seielstad - MCSE Senior Systems Administrator Peregrine Systems Atlanta, GA http://www.peregrine.com > -----Original Message----- > From: missy koslosky [mailto:[EMAIL PROTECTED]] > Sent: Monday, January 14, 2002 8:03 AM > To: Exchange Discussions > Subject: Re: GWART > > > Nope. LaCretia is correct - * should be the only address space. > > Missy > ----- Original Message ----- > From: "Neil Hobson" <[EMAIL PROTECTED]> > To: "Exchange Discussions" <[EMAIL PROTECTED]> > Sent: Monday, January 14, 2002 7:49 AM > Subject: RE: GWART > > > Something in the back of my mind says that *@* is a better > match than just *. But you still haven't stated what your > desired flow is.... > > Neil > > -----Original Message----- > From: Sandoval, LaCretia, Triaton/US [mailto:[EMAIL PROTECTED]] > Posted At: 14 January 2002 12:37 > Posted To: Exchange Mailing List > Conversation: GWART > Subject: RE: GWART > > > One of the address spaces on one bridgehead is listed as > *(A)* and the other is listed as *:. One of our admins from > our NJ site stated that we need to add the *(A)* to the other > bridgehead. I tend to disagree though. I tend to think that > the *(A)* needs to be set to match *:. Everything I have > researched has stated that it should be *;. > > Regards, > ________________ > LaCretia Sandoval > Dallas LAN Administrator > Triaton, NA, Inc. > 972-443-4027 > _______________________ > > -----Original Message----- > From: Chris Scharff [mailto:[EMAIL PROTECTED]] > Sent: Friday, January 11, 2002 3:29 PM > To: Exchange Discussions > Subject: RE: GWART > > I've read them, but could I explain how to in general. Um, > not without a six pack... however, it is Friday afternoon. > > What is the address space on your IMS boxxen? What is the > desired flow for IMS traffic? > > > -----Original Message----- > > From: Sandoval, LaCretia, Triaton/US [mailto:[EMAIL PROTECTED]] > > Sent: Friday, January 11, 2002 1:50 PM > > To: Exchange Discussions > > Subject: GWART > > > > > > I have two sites with two bridgeheads in place. My problem is, > > internet traffic is coming in one and going out the other > bridgehead. > > I decided to look into the routing table to see why this > is. However, > > I decided it would be easier to review the table by printing the > > GWART0.MTA information and read through it. I discovered > that there is > > no entry for the new site that I brought up with the new > bridgehead. > > Does anyone out there have any experience reading the > GWART0.MTA file? > > I am having trouble piecing all of the routes together to draw > > a picture of how traffic is flowing through our site. Any > > help would be greatly appreciated. > > > > Regards, > > LaCretia Sandoval > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > ********************************************************************** > This email and any files transmitted with it are confidential > and intended solely for the use of the individual to whom it > is addressed. Any view or opinions presented are solely those > of the author and do > not necessarily represent those of Silversands, or any of its > subsidiary companies. > If you have received this email in error, please contact our Support > Desk immediately by telephone on 01202-360000 or via email at > [EMAIL PROTECTED] > ********************************************************************** > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > > > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
