Barb,
No , I didn't delete the IMS on the e5.5 server, but I have stopped the
service when recalculating routing...Didn't seem to make a difference. I
will try the articles you specified. 

The firewall is OK for both IMC's on port 25.
Thanks,

MP

-----Original Message-----
From: Barb McDonald [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 24 January 2002 11:19 AM
To: Exchange Discussions
Subject: RE: Removing last Exchange 5.5 from e2k


Did you delete the 5.5 IMS?  If not you need to and let the SMTP Servers
in
EX2k take over?  As long as there is a 5.5IMS in the ORG it will be the
preferred route for Internet mail.  Also make sure your Firewall
understands
that the E2K Server(s) are allowed to send/receive SMTP via Port 25.

Look at Q272314 and Q284148 for the detailed procedures for retiring the
5.5
server.

-----Original Message-----
From: Mark Peoples [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 23, 2002 3:45 PM
To: Exchange Discussions
Subject: Removing last Exchange 5.5 from e2k


Hi,

Although I have followed Q152959.. I still have an issue:
I have 2 e2k SP1 servers (one with a Internet mail connector) and 1 e5.5
SP4 server (second internet mail connector with cost=100).

The Routing Calculation Server is set to be the e2k server with the mail
connector. When I look at the routing tab in the Site Addressing
properties on e5.5 server, the more expensive  SMTP conector is listed
as the SMTP route.

This is affecting inbound / outbound mail for the second e2k server who
still thinks the e5.5 server has the IMC. When I click re-calculate
routing, nothing changes. I don't think the e5.5 server is aware of the
e2k IMC...

Is it just a matter of upgrading the e5.5 server to e2k,  and letting
exchange routing sort itself out?? Then removing the 2nd and more
expensive IMC?

Any comments or suggestions would be appreciated..

Thanks,
MP

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

Reply via email to