This is usually caused by network congestion. You can run a netmon trace to confirm this is the cause in your case. If that's what's causing the problem in your case, you can call PSS and get some information for registry changes to tune the length of time that will pass before the message box is presented or disable it altogether.
Tom. -----Original Message----- From: John Q Jr. [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 19, 2002 2:44 PM To: Exchange Discussions Subject: Re: promoting E2K to a DC I have a E2K, SP2 box that continues to give "Requesting data from Exchange server" errors to users. All users are using OLK2002. I have tried everything I know. To no avail. I have also tried to reset the OLK clients, still an issues. It's odd it seams to rotate, one day a user will work fine and then not, then a nother user will expirence the same isse. I would think it's a load issue, but w/ only 25 users on this ssytem, there is no way. Even checked w Prof monitor. 1GB mem, dual 550 Procs, 36 GB of free space So I am thinking it's an issue with E2K DC communication. So my fix is to promote the E2K Server to a DC w/ a GC on it. Any reason I should not? Thank You, - John Q Jr. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
