http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q238642&;
http://support.microsoft.com/default.aspx?scid=kb;[LN];Q238573
I seem to remember some off-hand note in the installation guide that is
easy to miss and is very important. But I am having trouble remembering if
this was the interorg sync tool or the interorg replication tool.
This may be it:
It is important to understand that the service account and mailbox that
you create must be listed as an owner of each public folder and subfolder
you want to replicate, on either the publisher or the subscriber. This
enables the utility to replicate Anonymous and Default permissions from
one organization to the other. Use Microsoft Outlook to change the
ownership and the permissions of public folders.
Or this:
The computer where the InterOrg Replicator utility is installed must be
located in the same domain as either the publisher or the subscriber
servers. The computer must have:
Interorg sync does not work across different languages.
Here are some notes from one of my daily status reports
Created test public folders on Exchange 5.5 VELOCYS-LAB1:
- Public Folders
- Test 1
- Test 1a
- Test 2
- Test 2a
- Test 3
- Test 3a
- Test 3b
- Test 4
- Test 4a
- Test 5
- Test 5a
Created test postings in each folder
Installation of InterOrg Replication utility
- Prepare the Publisher (VELOCYS-LAB1 Exchange 5.5)
- Created service account
- Username: interorg_sync_pub
- Full Name: InterOrg Synchronization Publisher Account
- Description: fakebattelle is the password
- Password: fakebattelle
- Password Never Expires
- Created associated Exchange 5.5 mailbox
- Used Outlook to add interorg_sync_pub account as Owner of the following
folders
- Test 1
- Test 1a
- Test 2a
- Test 3
- Test 3b
- Test 5
- Used Exchange System Administrator to add client permissions of Owner
for
free/busy information
- SCHEDULE+ FREE/BUSY
- EX:/o=FakeBattelle/ou=Battelle
- Used Outlook to create "ExchsyncSecurityFolder" as a top-level folder
- Specified the following permissions
- Default None
- Anonymous None
- interorg_sync_pub Custom (Folder visible)
- Prepare Subscriber
- Created service account (WS-PLC-EXCH01 Exchange 2000)
- Username: [EMAIL PROTECTED]
- Full name: InterOrg Synchronization Subscriber (Velocys)
- Password: velocys
- Created associated Exchange 2000 mailbox
- Ensured that Exchange 2000 mailbox was initialized in the store
- Using Exchange System Manager, created following top-level folders
- Test 1
- Test 2
- Test 3
- Test 4
- Test 5
- Using Exchange System Manager, gave interorg_sync_sub1 Publishing
Editor to the
following folders:
- Test 1
- Test 2
- Test 3
- Test 4
- Test 5
- Using Exchange System Manager, gave interorg_sync_sub1 Publishing
Editor
permissions to the following system folders:
- SCHEDULE+ FREE BUSY
- EX:/o=Velocys/ou=First Administrative Group
- To accomplish this, highlight "Public Folders" and then choose
"Action | View System Folders" from the menu
- Used Exchange System Manager to create "ExchsyncSecurityFolder" as a
top-level
folder
- Specified the following permissions
- Default None
- Anonymous None
- interorg_sync_pub Custom (Folder visible)
- Installing files on VELOCYS-LAB1 Exchange 5.5 server
- Created directory "C:\EXCHSYNC"
- Copied files from the Exchange Server 5.5 SP4 CD
- Copied all files in the "\ENG\SERVER\SUPPORT\EXCHSYNC\I386"
directory
to
"C:\EXCHSYNC"
- Ran EXSCFG.EXE
- Select "Session | Add" from the menu
- Selected the "Schedule+ Free/Busy Replication" radio button and
pressed
the "OK" button
- Entered "Velocys Free/Busy" for the Title field
- Set Maximum Tasks field to "1"
- Set Schedule to All Day, Every Day, 15 minutes
- Enabled logging, ex00yymmdd.log
- Publishing Organization
- Server: VELOCYS-LAB1
- Mailbox: interorg_sync_pub
- NT Account
- Username: interorg_sync_pub
- Password: fakebattelle
- Domain: FAKEBATTELLE
- Subscriber Organization
- Server: WS-PLC-EXCH01
- Mailbox: interorg_sync_sub1
- NT Account
- Username: interorg_sync_sub1
- Password: velocys
- Domain: VELOCYS
- Site List: All Sites
- Select "Session | Add" from the menu
- Selected the "Public Folder(s) Replication" radio button and
pressed
the "OK" button
- Entered "Velocys Public Folders" for the Title field
- Set Maximum Tasks field to "1"
- Set Schedule to All Day, Every Day, 15 minutes
- Enabled logging, ex01yymmdd.log
- Publishing Organization
- Server: VELOCYS-LAB1
- Mailbox: interorg_sync_pub
- NT Account
- Username: interorg_sync_pub
- Password: fakebattelle
- Domain: FAKEBATTELLE
- Subscriber Organization
- Server: WS-PLC-EXCH01
- Mailbox: interorg_sync_sub1
- NT Account
- Username: interorg_sync_sub1
- Password: velocys
- Domain: VELOCYS
- Folder List
- Test1 <-> Test1 Subfolders Deletions
- Test2 <-> Test2 Subfolders Deletions
- Test3 <-> Test3 Subfolders Deletions
- Test4 <-> Test4 Subfolders Deletions
- Test5 <-> Test5 Subfolders Deletions
- Created Custom Recipient for "[EMAIL PROTECTED]"
- Ran EXSSRV.EXE
- Pressed "Install" button
- Account: FAKEBATTELLE\interorg_sync_pub
- Password: fakebattelle
- Configuration File: c:\exchsync\exchsync.esc
- Working Directory: c:\exchsync
- Automatic Startup: Yes
- Start the service
- Created Contact in Exchange 2000 for Greg Deckler
- [EMAIL PROTECTED]
- Logged into Greg Deckler account on VELOCYS-LAB1 Exchange 5.5 server
and added
appointments including reoccurring appointments.
- Waited for replication to occur.
Also:
The InterOrg Replication Configuration Utility Cannot Log On When A
Mailbox Exists in More than One Site in an Exchange Organization
If a mailbox exists in more than one site in an Exchange organization, the
InterOrg Replication Configuration utility cannot log on to a server in
that organization. This is true regardless of whether the organization is
the publishing organization or the subscribing organization.
If you should encounter this problem while installing the InterOrg
Replication Configuration utility, rename one of the mailboxes in the
target site and try to log on again.
> I have setup the InterOrg Replication Utility to replicate public folders
> between two different domains/organizations.
> Everything appears to be installed correctly. I was able to see the folders
> on each end, and pick what to
> replicate from, and what to replicate to. I also installed the service,
> which it says it running. However, there
> is no data in the Subscriber folders. It's been about 5 hours since I
> started the service. We have a two way trust
> established, and about 100 MB of data that we are trying to replicate. Is
> anybody else using this successfully?
> If so, did you have any problems getting the data to move over, or am I just
> not being patient enough? I have
> the replication set to go every 30 minutes. I would have thought there
> would be SOMETHING moved over
> by now.
>
> Exchange 5.5 SP4, OL98.
>
> Thanks.
>
> Robert
_________________________________________________________________
List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe: mailto:[EMAIL PROTECTED]
Exchange List admin: [EMAIL PROTECTED]
