Start by ensuring that all the settings on both ends "match" - especially the two way alternate setting. It almost sounds like that isn't configured correctly.
The other idea is to make sure that its not a name resolution issue by using IP addresses rather than host names to specify the server on the other end. ------------------------------------------------------ Roger D. Seielstad - MCSE Sr. Systems Administrator Inovis - Formerly Harbinger and Extricity Atlanta, GA > -----Original Message----- > From: Bennett, Joshua [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, February 05, 2003 12:06 PM > To: Exchange Discussions > Subject: MTA Issues > > > Hello all, > > I am having an issue with an X.400 connection from my hub > server to a remote > site. My current environment is as follows: All mail servers > are Exchange > 5.5 SP4/WinNT4 SP6a all hotfixes applied. The remote EX > server is also the > BDC in remote domain. The sites are connected by a fractional > T1 at 384K. > There is minimal utilitization on the link but the MTA > continually queues > mail going from the hub server to the remote site in > question. I repeatedly > get Event ID: 289 and 1294 from MSExchangeMTA whenever this > happens. I have > had reports run on the QOS of the fractional T1 and all comes > back clean. > The strange part about all of this is if a user in the remote > site sends a > message that is routed to the hub server then the X.400 > connection opens and > the queue on the hub server flushes. The queue on the remote > server never > seems to back up. I am using IP's in the Address space of the > X.400 Stack > properties, so that fix did nothing. > > Please help me, I'm beating my head against the wall with this one. > > Josh Bennett > Exchange Admin\Systems Engineer > Cotelligent, Inc. > 401 Parkway Drive > Broomall, PA. 19008 > 610-359-5929 > www.cotelligent.com > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
