Can you see the 5.5 server in NTBACKUP on the server with the Admin Gui on it? Otherwise, slap the tape drive on the 5.5 member server.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Hoffman Sent: Wednesday, September 24, 2003 7:47 PM To: Exchange Discussions Subject: RE: 5.5 to 2000 Transition Argh! Trying this IS making my head hurt. I installed to another member server in the same domain as my current Exchange 2000 server. So, both are in an Active Directory domain. I get the same thing with the 5.5 management console... It just can't find the 5.5 server. I was used to seeing this just connect with no problem previously when I had two 5.5 servers going at once. So, what 's the problem here? Some service I didn't install, something I haven't configured correctly? I'm getting no luck in Microsoft's knowledgebase. This is just a basic install following the instructions Andy gave here... Same org and site as the old server. I installed just the server itself and the management console, and installed it as a non multi-site server. I have no idea if that's the problem. I wouldn't think it would be. Any clue as to why the management console on another server will not pick up this 5.5 server?? Thanks, Matt -----Original Message----- From: Andy David [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 24, 2003 7:06 PM To: Exchange Discussions Subject: RE: 5.5 to 2000 Transition Mongo head hurt. You should be able to setup a new 5.5 server on a member server. Just make sure its got the same OS and Exchange SPs as the original production 5.5 server. Create a new site and org, using the exact same org and site name as the orig 5.5 server. Restore only the info store, pop out those mailboxes to psts and import them into the new server. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Hoffman Sent: Wednesday, September 24, 2003 5:48 PM To: Exchange Discussions Subject: 5.5 to 2000 Transition Gah! Sorry about hijacking that thread... OK, Migration to Exchange 2000 from 5.5 was a nightmare, but I managed to get MOST of my users to transfer over. Unfortunately, 15 of the 160 did not transfer inexplicably. They now have no mailboxes. Also, even more unfortunately, a couple of them are people who had huge mailboxes and lost a whole lot of data here. I still have my backups from 5.5, but the question is, how the hell do I get any of it back now? The tape drive that was used for those backups was on the same server that is now 2000, and is now in AD where it was in an NT 4 domain before. I tried installing 5.5 on another server and the 5.5 management tools on the upgraded box. Normally that means one can see the existing 5.5 servers and restore or backup data to them remotely. However, the 5.5 management tools cannot see the other server that 5.5 is now installed to. It's in the old domain, whereas the new box is in the new AD domain. Is this the problem? Should I install 5.5 somewhere in my AD domain and try restoring there? Is this a common problem with the 5.5 management tools that they can't go cross-domain to see 5.5 server? I guess any kind of help here would be great since my 15 "lost" users are having major panic attacks. Thanks, Matt _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
