You'll need to change the partition types to type "fd" and update your
initrd, should work fine after that, let me know if it doesn't.
On Sat, 7 Aug 1999, Kit Ngan wrote:
> Hi,
>
> I got problem on the mirror/raid1 auto-mount during boot!
> It is running on cooker w/kernel 2.2.10
>
> I had build-up a mirror system with /dev/md0, /dev/md1 & /dev/md2 by
> following:-
>
> non-raid / boot
> -------------------------------------
> /dev/hda1 /
> /dev/hda2 extend
> /dev/hda5 /mirror
> /dev/hda6 swap
> -------------------------------------
> raid1 config
> -------------------------------------
> /dev/hdc1+hdd1 /dev/md0 /vhome
> /dev/hdc2+hdd2 /dev/md1 /home
> /dev/hdc3+hdd3 /dev/md2 /var
> -------------------------------------
> I tar all /vhome, /home & /var to /mnt/md0,md1&md2
> I could mount it... after raidstart /dev/md0,md1&md2...
> but problem is after re-boot...
> After SCSI detect...
> Auto-Detect Raid Array...
> ...DONE.
> it seem nothing detected!
> I got /etc/raidtab & /etc/raid1.conf!
>
> --
> Rgds Kit
> K&B Computer Technology Co.
> ICQ: 28280598
>
>
