On Fri, 22 Oct 1999, Steve Philp wrote:
> Axalon Bloodstone wrote:
> >
> > On Fri, 22 Oct 1999, Axalon Bloodstone wrote:
> >
> > > On Fri, 22 Oct 1999, Steve Philp wrote:
> > >
> > > [big snip]
> > >
> > > > So, I've now moved the UDMA/66 drive onto the normal cable and the
> > > > install there went just fine. Booting works also, so I'll wait a bit
> > > > before I screw it up again. :)
> > >
> > > I'll have info in .. installer says 9mins
> > > Will let ya know
> >
> > Ok i was successfull.
> > Just tryed to isolate if it was bios boot sequence and it has zero effect.
> > What was your ide layout, i've already moved cdrom to 2nd slave, was there
> > still hd's on the dma33 chains?
>
> Nope, no other HD's. The only things in the system when I attempted the
> install/boot on the UDMA/66 interface were the Zip drive on hdc and the
> CDROM on hdd.
ide zip drive?
I finally got the 'Li' i installed a drive onto the primary ide and
reinstalled lilo, you get the warning 'hde is not the first harddrive'
(note just crawled out of bed so thats posibly not exact) I had to remove
the drive, boot from floppy and reinstall lilo, reinstall the drive, and
she boots. Now if only i could remeber the lilo option to tell it hde is
the bios boot drive we'd both be all set
--
MandrakeSoft http://www.mandrakesoft.com/
--Axalon
