Well the problem that you are having with the envizex terminal is not
surprising. In order to get it to work you need the code for the xterminal
either on a floppy disk or loaded on the linux box. Since the Xterminal is an
HP and the software is propriatery software (Netstation 9 or 7.1) I doubt you
will get it to work.
But if you do have the code loaded. How about using TFTP?
-Al
> Trevor Farrell wrote:
>
> > Yann Forget wrote:
> >
> > > Hi,
> > >
> > > lee binkley a �crit :
> > > >
> > > > Al Smith wrote:
> > > >
> > > > > Yes it is possible if you use IP masquarding and such.
> > > > >
> > > > > -Al
> > > >
> > > > I will nedd 2 nic .
> > > > so in my /etc/rc.d/rc.local
> > > > ipchains -P foward DENY
> > > > ipchains -A foward -i eth1 -j MASQ
> > > > echo 1 >/proc/sys/net/ipv4/ip_foward
> > >
> > > Yes, but in that order :
> > >
> > > echo 1 >/proc/sys/net/ipv4/ip_foward
> > > ipchains -P foward DENY
> > > ipchains -A foward -i eth1 -j MASQ
> > >
> > > Regards,
> > > Yann
> > >
> > > --
> > > Ionix Services, les services r�seaux d'aujourd'hui
> > > http://www.ionix-services.com/
> > > Tel 04 76 70 64 24
> > > Fax 04 76 70 64 25
> >
> > I only had to type echo 1 >/proc/sys/net/ipv4/ip_foward once from the
> > command line - the system saves that instruction into the
> > /etc/sysconfig/network file, so you only need the two ipchains
> > instruction in /etc/rc.d/rc.local
>
> I have another question:
>
> I have an XEnvixzex Xterminal in which my boss wants setup into his
> office.
> To Monitor 2 servers, using a progeam called gpm 9which is a gui
> interface about your system.
>
> Is there a way to connect this Xterminal to my linux box , without have
> to be nfs, the reason I dont want nfs is because out network sometin
> hangs.
>
>
