Good morning,
On a clients workstation at boot I see this message displayed, which I
have never noticed before, that refers to idebus speed. This machine has
a 100Mhz bus and 128meg pc100 ram.
Linux version 2.2.16-2mdk ([EMAIL PROTECTED]) (gcc
version 2.95.3 19991030 (prerelease)) #1 Fri Jun 9 11:50:15 PDT 2000
Detected 400917 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 799.54 BogoMIPS
Memory: 127756k/131072k available (1228k kernel code, 408k reserved,
1608k data, 72k init, 0k bigmem)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 32K L1 D Cache: 32K
CPU: AMD AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xfb3c0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:38 [1106/0586]: Work around ISA DMA hangs (00)
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
ttyS03 at 0x02e8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
VT 82C598 Apollo MVP3
Chipset Core ATA-33
Split FIFO Configuration: 8 Primary buffers, threshold = 1/2
8 Second. buffers, threshold = 1/2
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide0: VIA Bus-Master (U)DMA Timing Config Success
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
ide1: VIA Bus-Master (U)DMA Timing Config Success
hda: SAMSUNG WN321620A (2.16 GB), ATA DISK drive
hdb: SAMSUNG WN321620A (2.16 GB), ATA DISK drive
hdc: QUANTUM FIREBALL CR8.4A, ATA DISK drive
hdd: TOSHIBA CD-ROM XM-6102B, ATAPI CDROM drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: SAMSUNG WN321620A (2.16 GB), 2060MB w/109kB Cache, CHS=523/128/63,
DMA
hdb: SAMSUNG WN321620A (2.16 GB), 2060MB w/109kB Cache, CHS=523/128/63,
DMA
hdc: QUANTUM FIREBALL CR8.4A, 8063MB w/418kB Cache, CHS=16383/16/63,
UDMA(33)
hdd: ATAPI 24X CD-ROM drive, 256kB Cache, DMA
Uniform CD-ROM driver Revision: 3.09
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 853.059 MB/sec
p5_mmx : 823.722 MB/sec
8regs : 559.308 MB/sec
32regs : 387.096 MB/sec
using fastest function: pII_mmx (853.059 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1
hdc: hdc1 hdc2 < hdc5 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 72k freed
Adding Swap: 68540k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.11 detected OK (220)
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft
1993-1996
3c503.c: Presently autoprobing (not recommended) for a single card.
3c503.c:v1.10 9/23/93 Donald Becker ([EMAIL PROTECTED])
eth0: 3c503 at i/o base 0x300, node 02 60 8c 4b f9 c7, using internal
xcvr.
eth0: 3c503 - 8kB RAM, 8kB shared mem window at 0xdc000-0xddfff.
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
registered device ppp0
PPP BSD Compression module registered
PPP Deflate Compression module registered
SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256)
(6 bit encapsulation enabled).
SLIP linefill/keepalive option.
IPv4 over IPv4 tunneling driver
Claims that can be overidden with idebus=xxx ? Possibly someone on the
list could explain where this statement would need to be in order to
correctly establish, and take advantage of the 100Mhz bus ? I don't
recognize this as an option in Lilo.
Thank you,
Dave
David M. Kufta
Konsult Ltd.
[EMAIL PROTECTED]
