Regarding the cable modem setup, check yo make sure that either pumpd or
dhcpd are installed. In linuxconf, click netowrking, basic host information.
Configure eth0 as your external interface:
hostname: localhost.localdomain
Adapter1: enabled, DHCP
netdevice: eth0
Kernel module: (your Network Card's driver)
Click accept
In Name Server Specification (DNS) type the default DNS ip addresses. I
don't know what these are for mediaone, but if you have a dual boot system
with Windows, when you get connected, you can open a DOS prompt, and type
ipconfig /all. this should list the DNS, or nameserver ip's.
This should be enough, unless something else has been configured
incorrectly.
> ----- Original Message -----
> From: "Jeff Hoffman" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, August 31, 2000 7:57 AM
> Subject: [expert] Specific setup for Mandarke 7.1 and cablemodem to
> mediaone.net
>
>
> > Looking for the specific set up for connecting Mandrake 7.1 to a cable
> > mode via dhcpcd to medaione.net.
> >
> > I believe I have the cards recognized but the settings under network set
> > up are not designed to be understood from the Windows world winipcfg...
> > Anyone have a working config they could send? BE happy to create a
> > translation table for the world....
>
______________________________________________________________________________
Vous avez un site perso ?
2 millions de francs � gagner sur i(france) !
Webmasters : ZE CONCOURS ! http://www.ifrance.com/_reloc/concours.emailif
