Let me know if you get your nVidia ge2 MX working. I have the same card and while it works in 2D quite well, it is lacking in the 3D department. Other than the udma and agp issues mandrake runs fairly good. I assume redat 7.2 probably has the same issues, though I may give it a try and see what happens. Do you know if the lm sensors package will work with this motherboard?
J Grant wrote: >Hi Steve > >I do not know the state of the current kernel but my mdk8.1 box had and >is still having problems with my >adaptec SCSI card did not work, IDE CDROM would not work, finally I got >another SCSI card, but had to boot from floppy. Now i find out AGP is >not fully supported yet, i have been tring to get nVidia ge2 MX working >today. > >Good luck, i have the same board, so i hope the new kernel is better >with it, just checking that now.. > >JG > >Steve wrote: > >>If anyone is using the Tyan Tiger MP S2460, could you please tell me how >>you were able to get udma 100 to work properly. Mandrake 8.1 wants to >>use udma 33 instead. I figure it may have something to do with Mandrake >>detecting the AMD 760MP chipset. If you have any pointers on setting up >>Mandrake with this motherboard please let me know. Thanks. >> > > >Hypermedia Research Centre >Sanyo R&D Headquarters, Tokyo >http://www.sanyo.co.jp/R_and_D/3dm/ >Tel: +81 (0)3 5803 3566 >Fax: +81 (0)3 5803 3640 >E-post: [EMAIL PROTECTED] >Please use open standard file formats for attachments > > >------------------------------------------------------------------------ > >Want to buy your Pack or Services from MandrakeSoft? >Go to http://www.mandrakestore.com > > message.footer > > Content-Type: > > text/plain > Content-Encoding: > > 8bit > >
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
