On 27 Dec 2001 16:53:11 +0100 Carlo Salinari <[EMAIL PROTECTED]> wrote:
> First of all: I know this is a known problem, but I've read and tried > all the suggestions in mandrakeuser/docs/hardware, linhardware, and many > usenet archives, and have found no working solution. > > Only after that, I'm posting here. > > The System: > - AMD Duron 750 > - Asus A7V bios revision 1004 [09/21/2000-VIA-KT133-<A7V>] > - IDE Interface: VT82C586 IDE (Apollo) [VIA Technologies, Bus Type: PCI] > - HD Maxtor 51536H2 15Gb 2Mb 7.2krpm ATA100 > - DVD CREATIVE DVD1241E > - CDRW LITE-ON LTR-24202B > - Linux Mandrake 8.1 download edition (3 cds) > > > The Problem: > - If the HD is connected as ATA66, the system installs and works > wonderfully. > > - If the HD is connected as ATA100, the system hangs just after LILO, at > the blue "multilanguage-welcome" screen. > If I try a CD re-installation, the boot process fails to find hda > saying: > hda: IRQ probe failed 0xffffffff8 > then identifies a Maxtor 51536H2 on hde, and hangs (kernel panic). > > Now, this is what I get executing lspci -vv|less: > > [...] > > 00:11.0 Unknown mass storage controller: Promise Technology, Inc.: > Unknown device 0d30 (rev 02) > Subsystem: Promise Technology, Inc.: Unknown device 4d33 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at 9000 [size=8] > Region 1: I/O ports at 8800 [size=4] > Region 2: I/O ports at 8400 [size=8] > Region 3: I/O ports at 8000 [size=4] > Region 4: I/O ports at 7800 [size=64] > Region 5: Memory at de800000 (32-bit, non-prefetchable) [size=128K] > Expansion ROM at <unassigned> [disabled] [size=64K] > Capabilities: <available only to root> > > [...] > > Wich, according to > this: http://www.mandrakeuser.org/docs/hardware/hbits5.html > led me to try the following, from a boot floppy: > > linux ide2=0x9000,0x8802 > > and even: > > linux ide2=0x9000,0x8802 ide3=0x8400,0x8002 > > but it didn't work. > > So, I don't know what to do now. > You could say: can't you be content with ATA66, since it works on your > system? > > No, I can't. > I'm not a performance maniac: I just need expandability. > I'll have to add more HDs to my system in the near future, and this > risks to become a real problem. > > Anyone can help me? > > Please send replyes to my address ([EMAIL PROTECTED]). > I have 2 systems using the same MOBO with multiple drives connected to ATA100 and have had no problem with installation since 8.0 when the driver for onboard ATA100 was added to the kernel. You may need to update the system BIOS but my guess would be that you have a component installed in the PCI Slot 2. That slot shares an IRQ with the Promise Controler. Move that component to another slot and you should be OK. Charles
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
