Hi!
Some ideas:
1) add something like this to /etc/lilo.conf
append=" hdc=ide-scsi "
see below:
image=/boot/vmlinuz-2.4.8-26mdk
label=linux
root=/dev/hdb5
initrd=/boot/initrd-2.4.8-26mdk.img
append=" hdc=ide-scsi devfs=mount "
read-only
2) assure that SG driver is installed
#modprobe sg
Best regards
Erik Kaffehr
s�ndag 06 januari 2002 09:10 skrev du:
> Ok, a little more information:
>
> running cdrecord -scanbus:
> > #> cdrecord -scanbus
> > Cdrecord 1.10 (i586-mandrake-linux-gnu) Copyright (C) 1995-2001 J�rg
> > Schilling
> > cdrecord: No such file or directory. Cannot open SCSI driver.
> > cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you
> > are root.
>
> #> cat /proc/scsi/scsi
> Attached devices:
>
> <other devices removed for clarity>
>
> Host: scsi0 Channel: 00 Id: 05 Lun: 00
> Vendor: YAMAHA Model: CRW8424S Rev: 1.0j
> Type: CD-ROM ANSI SCSI revision: 02
> <other deviced removed for clarity>
>
> Ok, it's there.
>
> I can mount the device with a regular CD installed with no problem, but
> cdrecord won't recognise it. And again: It used to work.
>
> I'd really appreciate some advise on this one!
--
Erik Kaffehr [EMAIL PROTECTED] alt. [EMAIL PROTECTED]
Mariebergsv�gen 53 +46 155 219338 (home)
S-611 66 Nyk�ping +46 155 263515 (office)
Sweden -- Message sent using 100% recycled electrons --
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
