Le Dimanche 26 Mai 2002 00:14, vous avez �crit : > Hi guys, > > I'm sadly experiencing a lot of freezes in my LM 8.1 box. I just hope I
Hi ! [I know my story is related to the 8.2 and 8.1, but it will perhaps help you...] I experienced EXACTLY the same thing, with my Mdk 8.2 just installed. I have a Duron 900 and a motherboard MSI 6330 Lite Edition 3 (VIA KT133A chipset) and a 3Dfx Voodoo 3 2000. It always freezed, totally randomly (no Telnet, nothing... just reboot). Just like you, I thought it was because of X. And my Linux is an internet gateway for my local wireless network. So I stopped launching X, and worked only on a pure console : still freezes, very often (one time per hour...), so it has nothing to do with X. I updated the BIOS : still the same. I recompiled the kernel with AMD K7 on : still the same. All the hardware worked fine under WinXP, and the fan was good and well attached, too... And I remembered that all was great with Mdk 8.1. So here is what I did : I downgraded my 8.2 kernel (2.4.18) to the 8.1 (2.4.8). And it NEVER freezes again. So will won't you try to downgrade to another Mdk kernel (from the 7.x) ? Don't do that with Mdk Software Manager/urpmi : it will uninstall almost all your system. Just do it with rpm -e kernel- (-doc, -header, 2.4.18-6mdk, -source). For headers, I had to use -nodeps, but this not important, because the 2.4.8 headers will be good. If you use iptables for your firewall, uninstall it all the same. Then use the 8.1 CD (or download the RPMS from a Mandrake 8.1 mirror), and install the 2.4.8 kernel, and the iptables from 8.1 too. Normally, after the installation, all the settings and the symbolic lynks in /boot will be correct. Just check them, check your lilo or grub, then reboot. Enjoy the non-freezing dimension. [Be carefull if you use PCMCIA card : for me, the old /etc/sysconfig/pcmcia (wich was working) has been overwritten by the new-old one, and PCMCIA couldn't work anymore. I just had to rewrite this config file, just like the first one was, and PCMCIA worked again (the line PCMCIA=yes, became PCMCIA=no, and the other lines disappeared, but I rewrote them).] Next time, I won't complain : I'll join the beta-test... :-/ After all, I don't need absolutely the 2.4.18 kernel... I even don't know the differences between 2.4.8 and 2.4.18, except this very interesting freezing function... What I like in Mdk 8.2 is the softwares within, not the kernel. N. P.S. : a lot of users complain about freezes, in MandrakeForum, and they accuse X or their KDM/GDM, or their graphic card, as they start X automatically at boot, thinking that Linux is only a graphical systems... I'm pretty sure all their troubles come from this kernel...
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
