I have problems w/ burning CDs after migrating to 9.0. Drakbackup and
mondo are unable to write CDR or CDRW. I want to be more precise but
don know hat to obtain more information from my box. It works for
several days until it doesn't work any more. I Don't know why.
# cdrecord -scanbus
Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 J�rg
Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) *
cdrecord: Warning: controller returns wrong size for CD capabilities
page.
0,1,0 1) 'LITEON ' 'CD-ROM LTN525S ' 'JL1N' Removable
CD-ROM
0,2,0 2) 'HL-DT-ST' 'CD-RW GCE-8160B ' '2.01' Removable
CD-ROM
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
=================
cat /proc/ide/sis
SiS 5513 Ultra 100 chipset
--------------- Primary Channel ---------------- Secondary Channel
-------------
Channel Status: On On
Operation Mode: Compatible Compatible
Cable Type: 80 pins 80 pins
Prefetch Count: 512 512
Drive 0: Postwrite Enabled Postwrite Disabled
Prefetch Enabled Prefetch Disabled
UDMA Enabled UDMA Disabled
UDMA Cycle Time Reserved UDMA Cycle Time
Reserved
Data Active Time 3 PCICLK Data Active Time 3
PCICLK
Data Recovery Time 1 PCICLK Data Recovery Time 1
PCICLK
Drive 1: Postwrite Disabled Postwrite Disabled
Prefetch Disabled Prefetch Disabled
UDMA Enabled UDMA Disabled
UDMA Cycle Time 4 CLK UDMA Cycle Time
Reserved
Data Active Time 3 PCICLK Data Active Time 8
PCICLK
Data Recovery Time 1 PCICLK Data Recovery Time 12
PCICLK
=====================
scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: LITEON Model: CD-ROM LTN525S Rev: JL1N
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: HL-DT-ST Model: CD-RW GCE-8160B Rev: 2.01
Type: CD-ROM ANSI SCSI revision: 02
============
What can I do to check/correct it?
Thanks,
Manuel Soto
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
