On Wednesday 29 Jan 2003 10:15 pm, Russell W. Behne wrote: > On pressing sync button on cradle: > Jan 29 16:12:51 behne kernel: hub.c: USB new device connect on bus1/2, > assigned device number 18 Jan 29 16:12:52 behne kernel: usbserial.c: Palm > 4.0 converter detected Jan 29 16:12:52 behne kernel: visor.c: Palm 4.0: > Number of ports: 2 Jan 29 16:12:52 behne kernel: visor.c: Palm 4.0: port 1, > is for Generic use and is bound to ttyUSB0 > Jan 29 16:12:52 behne kernel: visor.c: Palm 4.0: port 2, is for HotSync use > and is bound to ttyUSB1 > Jan 29 16:12:52 behne kernel: usbserial.c: Palm 4.0 converter now attached > to ttyUSB0 (or usb/tts/0 for devfs) > Jan 29 16:12:52 behne kernel: usbserial.c: Palm 4.0 converter now attached > to ttyUSB1 (or usb/tts/1 for devfs) > Jan 29 16:12:53 behne /etc/hotplug/usb.agent: Setup visor for USB product > 830/3/100 Jan 29 16:12:54 behne /etc/hotplug/usb.agent: missing kernel or > user mode driver visor > > I hope the above only means that pilot-link wasn't running. I really > don't know. What does it mean? What to do?
The "visor" module needs to be loaded but can't be. What kernel are you running because in a default mandrake kernel the module should be available. Have you recompiled your kernel and not selected that ? > > > On timeout: > Jan 29 16:14:02 behne kernel: usb.c: USB disconnect on device 18 > Jan 29 16:14:02 behne kernel: usbserial.c: Palm 4.0 converter now > disconnected from ttyUSB0 Jan 29 16:14:02 behne kernel: usbserial.c: Palm > 4.0 converter now disconnected from ttyUSB1 > > > # rpm -q pilot-link > pilot-link-0.9.5-8mdk So pilot-link is installed already - you don't need to install the tarball. Do you have Evolution installed - it is pretty good at setting up a Palm device if you just follow thru the instructions under tools/pilot-settings? (You will also need to have evolution-pilot installed.) If that was successful, you would probably just find that JPilot works fine. David -- Registered Linux User #207521 "The only reason some people get lost in thought is because it's unfamiliar territory." (Paul Fix)
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
