On Thu, 2003-03-20 at 09:40, Technoslick wrote: > On Thu, 2003-03-20 at 12:10, James Sparenberg wrote: > <snip> > > I was looking at 9.1 when I sent that... > > > > The two listings for the SMC card are > > > > > > card "SMC EZ 10/100 Fast Ethernet" > > manfid 0x01bf, 0x2220 > > bind "tulip" > > > > card "SMC EZ 10/100 Fast Ethernet" > > manfid 0x01bf, 0x2225 > > bind "tulip" > > > > >From 9.1 As you can see the manfid changes but not the driver. Adding > > this to /etc/pcmcia/config if it is not present then doing > > /etc/init.d/pcmcia may get you running. (assuming that the above isn't > > in 9.0's file) > > > > James > > Here's what I get when I run 'insmod pcnet_cs' (From what I gather, > pcnet_cs is the module I am suppose to have created and be loading): > > "<full path>/pcnet_cs.o.gz: unresolved symbol ei_interrupt_Rb93d8fa5" > "<full path>/pcnet_cs.o.gz: unresolved symbol ei_open_R0dc66b" > "<full path>/pcnet_cs.o.gz: unresolved symbol NS8390_init_Rc704c2b3" > "<full path>/pcnet_cs.o.gz: unresolved symbol ethdev_init_Rb4031158" > > Am I right in assuming that these are error messeges regarding the lack > of confiruration of the modeule itself?
Seems that it's the wrong module... the two I sent said that the driver is tulip.. have you tried that one. James > > T
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
