On Monday 13 October 2003 05:38 am, James Sparenberg wrote: > On Sun, 2003-10-12 at 17:22, James Conner wrote: > > I have a friend running MDK 9.1 with a CDROM on /dev/hdd and a Yamaha > > CDRW on /dev/hdc. Both are emulated scsi via /etc/lilo.conf. When you > > try to do a cd to cd copy in XCDRoast, it gives the following error: > > Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=0,0,0 > > gracetime=2 fs=8192k driveropts=burnfree,noforcespeed -v -useinfo > > speed=44 -dao -eject -pad tsize=0s -data - <snippage> > > I've google'd on the above warning and on "cdrecord: Premature EOF on > > stdin." from the output from XCDRoast. I've found that the above warning > > can be ignored(maybe, not confirmed) but no confirmed solutions on > > either. I've successfully setup ide burners on MDK 9.0(this system) and > > on other distros with no major problems. This one has me stumped. Any > > suggestions are appreciated. > > > > Jim > > Jim, > First did cdrao get installed (it's needed but not always there.) > > Just as a test if you put the needed cd in both drives (one blank one > real of course) and do > > cdrecord -v dev=0,0,0 speed=44 -isosize /dev/cdrom > > (on /dev/cdrom, this should match the device of your cdrom itself not > the cd-burner.) > > Does that work? If so that means that hardware is 100% as far as config > and recognition goes, next move on to the program itself and start > plugging away. (BTW the above works great for me, I never have tried to > learn any of the gui's *grin*) > > James
IIRC, cdrdao was installed. I'll double check. I'll try the above command tomorrow and see if it works. I have a list of things to try and check. I'll still entertain more ideas and things to try and check. :) Jim -- 12:01am up 25 days, 17:01, 3 users, load average: 0.07, 0.04, 0.05 ------------------------------------------------------------------------ Running Mandrake 9.0 - Linux - because life is too short for reboots...
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
