AF = Aldo Foot
AF> One way to troubleshoot is to create a
AF> new Xorg.conf and change the Driver line
AF> to "vesa". You need to boot into runlevel 3,
I always have inittab setup to boot to run level 3, then type startx
after logging in.
AF> log in as root and do "Xorg -configure",
AF> which will create a new config file at
AF> /root/xorg.conf.new. To use it you'll
AF> have to move it to /etc/Xorg.conf.
I did this and I have attached the resulting xorg.conf file.
When I ran startx, it didn't work. I've attached the xorg log file.
AF> In it find the Device block, like:
AF>
AF> Section "Device"
AF> Driver "vesa"
AF> EndSection
I'll try this next.
AF> Note that there's no longer need for an Xorg.conf
AF> since support for video cards is now more
AF> extensive[1].
I didn't have one on this box. I administer 16 different Fedora boxes
and none of them have an xorg.conf file. 12 of them run x86_64 qne the
rest run the appropriate 32-bit version of Fedora. I don't use any
non-Fedora repos. I tried preupgrade on one of the x86_64 boxes and it
didn't work, but fortunately F10 still worked.
For the machine I'm discussing in this thread, I use the F11 x86_64
network install CD to upgrade the system. Obviously the xdriver update
is causing me problems.
The rest are still running F10. The others have ATI graphics card so I
probably will not run into the same problems.
AF> I have an nvidia card in my 32bit system and
AF> never had issues, but everyone's setup
AF> is different. Try the Xorg archives[2] and
AF> mine for info there.
AF>
AF> [1] http://docs.fedoraproject.org/release-notes/f11/en-US/
AF> [2] http://lists.freedesktop.org/archives/xorg/
AF>
AF> good luck,
Thanks,
Pete
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "catalogue:/etc/X11/fontpath.d"
FontPath "built-ins"
EndSection
Section "Module"
Load "dri2"
Load "extmod"
Load "record"
Load "dri"
Load "dbe"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "CBLocation" # <str>
#Option "CBSize" # <i>
#Option "Randr12" # [<bool>]
#Option "ScalingMode" # <str>
#Option "EXAPixmaps" # [<bool>]
Identifier "Card0"
Driver "nouveau"
VendorName "nVidia Corporation"
BoardName "NV44 [GeForce 6200 LE]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.6.el5 x86_64
Current Operating System: Linux mrburns.toyon.corp 2.6.29.4-167.fc11.x86_64 #1
SMP Wed May 27 17:27:08 EDT 2009 x86_64
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Build Date: 18 May 2009 02:47:15PM
Build ID: xorg-x11-server 1.6.1.901-1.fc11
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 25 17:15:14 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins,
catalogue:/etc/X11/fontpath.d,
built-ins
(**) ModulePath set to "/usr/lib64/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse'
will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7b40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0...@1:0:0) nVidia Corporation NV44 [GeForce 6200 LE] rev 161, Mem @
0xfd000000/16777216, 0xc0000000/536870912, 0xfc000000/16777216, BIOS @
0x????????/131072
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in
the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in
the config file.
(II) "record" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in
the config file.
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "nouveau"
(II) Loading /usr/lib64/xorg/modules/drivers//nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.0.10
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) NOUVEAU driver
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) Primary Device is: PCI 0...@00:00:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(--) NOUVEAU(0): Chipset: "NVIDIA NV44"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) NOUVEAU(0): Initializing int10
(II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib64/xorg/modules/extensions//libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) NOUVEAU(0): [drm] nouveau interface version: 0.0.12
(--) NOUVEAU(0): [drm] kernel modesetting not available
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) NOUVEAU(0): Randr1.2 support enabled
(==) NOUVEAU(0): Using HW cursor
(--) NOUVEAU(0): Linear framebuffer at 0xC0000000
(--) NOUVEAU(0): MMIO registers at 0xFD000000
(II) NOUVEAU(0): Initial CRTC_OWNER is 4
(II) NOUVEAU(0): Attempting to load BIOS image from PROM
(II) NOUVEAU(0): ... appears to be valid
(II) NOUVEAU(0): BIT BIOS found
(II) NOUVEAU(0): Bios version 05.44.02.67
(II) NOUVEAU(0): Found Display Configuration Block version 3.0
(!!) NOUVEAU(0): Raw DCB entry 0: 01000300 00000028
(!!) NOUVEAU(0): Raw DCB entry 1: 02011310 00000028
(!!) NOUVEAU(0): Raw DCB entry 2: 01011312 00000000
(!!) NOUVEAU(0): Raw DCB entry 3: 020223f1 00c0c080
(--) NOUVEAU(0): Parsing VBIOS init table 0 at offset 0xDCEA
(--) NOUVEAU(0): Parsing VBIOS init table 1 at offset 0xE04F
(--) NOUVEAU(0): Parsing VBIOS init table 2 at offset 0xE589
(--) NOUVEAU(0): Parsing VBIOS init table 3 at offset 0xE6DE
(--) NOUVEAU(0): Parsing VBIOS init table 4 at offset 0xE888
(II) NOUVEAU(0): Output VGA-0 using monitor section Monitor0
(II) NOUVEAU(0): I2C bus "VGA-0" initialized.
(II) NOUVEAU(0): Output DVI-I-0 has no monitor section
(II) NOUVEAU(0): I2C bus "DVI-I-0" initialized.
(II) NOUVEAU(0): I2C device "VGA-0:E-EDID segment register" registered at
address 0x60.
(II) NOUVEAU(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) NOUVEAU(0): EDID for output VGA-0
(II) NOUVEAU(0): I2C device "DVI-I-0:E-EDID segment register" registered at
address 0x60.
(II) NOUVEAU(0): I2C device "DVI-I-0:ddc2" registered at address 0xA0.
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: DEL Model: 400d Serial#: 1095059267
(II) NOUVEAU(0): Year: 2004 Week: 39
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Digital Display Input
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38 vert.: 31
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
(II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NOUVEAU(0): Default color space is primary color space
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): GTF timings supported
(II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported VESA Video Modes:
(II) NOUVEAU(0): 720x...@70hz
(II) NOUVEAU(0): 640x...@60hz
(II) NOUVEAU(0): 640x...@75hz
(II) NOUVEAU(0): 800x...@60hz
(II) NOUVEAU(0): 800x...@75hz
(II) NOUVEAU(0): 1024x...@60hz
(II) NOUVEAU(0): 1024x...@75hz
(II) NOUVEAU(0): 1280x1...@75hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported Future Video Modes:
(II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): Supported additional Video Mode:
(II) NOUVEAU(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) NOUVEAU(0): Serial No: T611649PAEGC
(II) NOUVEAU(0): Monitor name: DELL 1905FP
(II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz,
PixClock max 140 MHz
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff0010ac0d4043474541
(II) NOUVEAU(0): 270e010380261f78eeee95a3544c9926
(II) NOUVEAU(0): 0f5054a54b00714f8180010101010101
(II) NOUVEAU(0): 010101010101302a009851002a403070
(II) NOUVEAU(0): 1300782d1100001e000000ff00543631
(II) NOUVEAU(0): 3136343950414547430a000000fc0044
(II) NOUVEAU(0): 454c4c203139303546500a20000000fd
(II) NOUVEAU(0): 00384c1e510e000a20202020202000d4
(II) NOUVEAU(0): EDID vendor "DEL", prod id 16397
(II) NOUVEAU(0): Not using default mode "640x350" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "640x400" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "720x400" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "640x480" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) NOUVEAU(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024
1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492
520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414
449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Output VGA-0 disconnected
(II) NOUVEAU(0): Output DVI-I-0 connected
(II) NOUVEAU(0): Using exact sizes for initial modes
(II) NOUVEAU(0): Output DVI-I-0 using initial mode 1280x1024
(--) NOUVEAU(0): VideoRAM: 262144 kBytes
(==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 1280)
(**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz),
64.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz),
80.0 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024
1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz),
64.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NOUVEAU(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz),
60.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5
kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync (67.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0
kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5
kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4
kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0): Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7
kHz, 74.6 Hz
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(**) NOUVEAU(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1
kHz, 72.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9
kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9
kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2
kHz, 56.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5
kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9
kHz, 72.8 Hz
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492
520 -hsync -vsync (37.9 kHz)
(**) NOUVEAU(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5
kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5
kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5
kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414
449 -hsync +vsync (31.5 kHz)
(==) NOUVEAU(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib64/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.5.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib64/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NOUVEAU(0): Allocated 128MiB VRAM for framebuffer + offscreen pixmaps, at
offset 0x0
(II) NOUVEAU(0): [drm] Using the DRM lock SAREA also for drawables.
(II) NOUVEAU(0): [drm] framebuffer handle = 0x2fffc000
(II) NOUVEAU(0): [drm] added 1 reserved context for kernel
(II) NOUVEAU(0): X context handle = 0x1
(II) NOUVEAU(0): [drm] installed DRM signal handler
(II) NOUVEAU(0): Opened GPU channel 1
(II) NOUVEAU(0): Saving VGA fonts
(II) NOUVEAU(0): Saving crtcs
(II) NOUVEAU(0): Saving encoders
(II) EXA(0): Offscreen pixmap area of 134217728 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): [DRI] installation complete
(II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
(II) NOUVEAU(0): [XvMC] Extension initialized.
(II) NOUVEAU(0): NVEnterVT is called.
(II) NOUVEAU(0): GART: PCI DMA - using 3840KiB
(II) NOUVEAU(0): Saving VGA fonts
(II) NOUVEAU(0): Saving crtcs
(II) NOUVEAU(0): Saving encoders
(II) NOUVEAU(0): Setting dpms mode 3 on vga encoder (output 0)
(II) NOUVEAU(0): Setting dpms mode 3 on vga encoder (output 1)
(II) NOUVEAU(0): Setting dpms mode 3 on tmds encoder (output 2)
(II) NOUVEAU(0): Setting dpms mode 3 on CRTC 0
(II) NOUVEAU(0): Setting dpms mode 3 on CRTC 1
(II) NOUVEAU(0): Setting dpms mode 3 on CRTC 0
Fatal server error:
Detected GPU lockup
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
(II) NOUVEAU(0): NVLeaveVT is called.
(II) NOUVEAU(0): Restoring encoders
(II) NOUVEAU(0): 0xD0B6: Parsing digital output script table
(II) NOUVEAU(0): Restoring crtcs
(II) NOUVEAU(0): Restoring VGA fonts
(II) NOUVEAU(0): Restoring CRTC_OWNER to 4.
--
fedora-list mailing list
[email protected]
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
