Thanks This is the info ------------- eth0 Link encap:Ethernet HWaddr 00:19:99:0D:CC:14 inet addr:77.78.8.89 Bcast:77.78.8.89 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:509 errors:0 dropped:0 overruns:0 frame:0 TX packets:473 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:72383 (70.6 KiB) TX bytes:195760 (191.1 KiB) Interrupt:23 Base address:0xe000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) ------ I am trying to configure a dedicated hosting server On Thu, Aug 27, 2009 at 8:46 PM, Clint Dilks <[email protected]> wrote: > > [email protected] wrote: >> >> Thanks all, >> >> I will have two static ips as 77.78.8.111 and 77.78.8.89 >> >> I will have this configure: >> >> >> DEVICE=eth0:0 >> BOOTPROTO=static >> IPADDR=77.78.8.111 >> BROADCAST = ??????? >> NETWORK=???? >> NETMASK=255.255.255.0 >> TYPE=Ethernet >> ONBOOT=yes >> >> >> and >> >> DEVICE=eth0:1 >> BOOTPROTO=static >> IPADDR=77.78.8.89 >> BROADCAST = ?????? >> NETWORK=???? >> NETMASK=255.255.255.0 >> TYPE=Ethernet >> ONBOOT=yes >> >> >> >> What value would for BROADCAST and NETMASK ? >> >> >> >> Thanks again >> >> On Thu, Aug 27, 2009 at 8:12 PM, Clint Dilks <[email protected] >> <mailto:[email protected]>> wrote: >> >> online.service.com <http://online.service.com>@gmail.com >> <http://gmail.com> wrote: >> >> Hi all, >> >> I like to add an extra ip address to my fedora server. But >> here is my ifcfg-eth0 file in under >> /etc/sysconfig/network-scripts directory >> >> DEVICE=eth0 >> BOOTPROTO=dhcp >> TYPE=Ethernet >> ONBOOT=yes >> >> there is no IPADDR field. Where possibly i can find "IPADDR" >> gets defined? >> >> >> Thanks! >> >> This indicates you are getting an address via DHCP. >> >> In order to setup a second interface you can either use >> system-config-network and look at setting up an alias. Or manually >> convert >> >> //etc/sysconfig/network-scripts/ifcfg-eth0 to >> /etc/sysconfig/network-scripts/ifcfg-eth0:0 and >> /etc/sysconfig/network-scripts/ifcfg-eth0:1 making sure that the >> files contain the information that you need. >> >> The Link below seems to be a good example of what needs to be done. >> >> >> http://www.xenocafe.com/tutorials/linux/redhat/bind_multiple_ip_addresses_to_single_nic/index.php >> >> >> /// >> >> -- fedora-list mailing list >> [email protected] <mailto:[email protected]> >> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list >> Guidelines: >> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines >> >> > Hi, > > What I suggest you do is have your system configured as it was via DHCP and > then use the command ifconfig eth0 to see what the broadcast and network are > being set to. Then modify your configuration to match. > > Ideally if you don't understand this already you should talk to the person > who setup the DHCP server on your network to make sure you are doing things > correctly. If the DHCP server is being provided by a home router that no one > has set up for you previous and you move to static addresses it is likely > that you will have to configure NAT manually on your home router to get > things working correctly. > > Good Luck > > -- > fedora-list mailing list > [email protected] > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines -- fedora-list mailing list [email protected] To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
