On Thu, Oct 8, 2009 at 10:46 PM, Didar Hossain <[email protected]>wrote:
> On Wed, Oct 7, 2009 at 3:46 PM, L <[email protected]> wrote: > >> >> >> On Tue, Oct 6, 2009 at 1:09 AM, kalinix <[email protected]>wrote: >> >>> On Mon, 2009-10-05 at 19:09 +1100, L wrote: >>> >>> Hi, >>> >>> I plan to get a USB wireless Broadband modem from >>> Vodafonehttp://www.vodafone.com.au/personal/mobilebroadband/mobile-broadband-prepaid.htm >>> >>> The deal seems attractive. any of you have this USB modem work on >>> Fedora 11 via NM? >>> >>> I am happy to hear you experiences with Vodafone USB wireless modem. >>> >>> Y >>> >>> >>> >>> I do, and it works ok both from NM and cli (through wvdial). >>> >>> However there is also https://forge.betavine.net/ >>> >>> >>> >>> Could you show some steps? after plug this USB modem in, I got message >> usb 2-1: new full speed USB device using uhci_hcd and address 5 >> usb 2-1: New USB device found, idVendor=12d1, idProduct=1001 >> usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=1 >> usb 2-1: Product: HUAWEI Mobile >> usb 2-1: Manufacturer: ������������������� >> usb 2-1: SerialNumber: ������������������� >> usb 2-1: configuration #1 chosen from 1 choice >> option 2-1:1.0: GSM modem (1-port) converter detected >> usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0 >> option 2-1:1.1: GSM modem (1-port) converter detected >> usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1 >> option 2-1:1.2: GSM modem (1-port) converter detected >> usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2 >> usb-storage: probe of 2-1:1.3 failed with error -1 >> >> NM does not show any response. >> > > That one is the Huawei E620 USB modem (grep -i huawei -A 5 > /var/lib/misc/usb.ids) > > As root, you will need to run "wvdialconf" - this will create a > "/etc/wvdial.conf" file. > You will just need to update the "Phone", "Username" and "Password" > entries. > > Here is how my "/etc/wvdial.conf" looks - > > [Dialer Defaults] > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Modem Type = Analog Modem > Baud = 9600 > New PPPD = yes > Modem = /dev/ttyUSB0 > ISDN = 0 > Phone = xxxx > Password = xxxxxxx > Username = xxxxxxxx > Stupid Mode = On > thanks, my modem is E620 too. after activated, i was give account number 4000xxxxx MSISDN 0451xxxxxx alike mobile number pin xxxxxx which of these is phone, password and username in wvdial,conf thanks for your help Y > > I had to put in the "Stupid Mode = On" line myself. The other lines were > put in by `wvdialconf'. > Note: I am using the Huawei EC1260 USB modem, so your "Init1" and "Init2" > strings may come > out different. > > I am using an older NM (Network-Manager) where dialup is broken, so can't > help you there. > > Regards, > Didar > > > -- > fedora-list mailing list > [email protected] > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > Guidelines: > http://fedoraproject.org/wiki/Communicate/MailingListGuidelines >
-- fedora-list mailing list [email protected] To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
