On Sat, 28 Nov 2009, Tom Horsley wrote:
> On Fri, 27 Nov 2009 22:33:40 -0500 (EST)
> Robert P. J. Day wrote:
>
> > the setup seems correct, except for the persistent blanking.
> > thoughts?
>
> I went through that for years thinking it was an ATI driver problem,
> but finally found it was the display itself (in my case a
> Westinghouse Digital HDTV monitor). I found if I used a different
> input on the monitor, the blanking went away.
ok, i guess i can try another display. curiously, i've connected
the same display to the output of my beagleboard, and the splash
screen of the u-boot bootloader shows up crisp and solid. and stays
there.
rday
p.s. the beagle board (beagleboard.org) has an HDMI-format output
*connector*, but outputs only DVI-D. i was simply pointing out that
*that* signal has no trouble on that display.
--
========================================================================
Robert P. J. Day Waterloo, Ontario, CANADA
Linux Consulting, Training and Kernel Pedantry.
Web page: http://crashcourse.ca
Twitter: http://twitter.com/rpjday
========================================================================
--
fedora-list mailing list
[email protected]
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
