It seems you use the lvm provied by fc11 defaultly . in fc12 it seems not work "./dev/md/0_0: No such device" means could not found the /dev/md/.... .Re format the disk and have try ! Good luck!
2009/12/1, Peter J. Stieber <[email protected]>: > > I'm trying to use x86_64 network install CD to load F12 on an ASUS P5Q MB. > The machine was successfully running F11. I tried to upgrade using the > network install CD, but I ran into some problem. I blamed this on the fact > I was also using the rpm fusion repository, but I didn't really look into > the cause. I reloaded F12 from scratch, wiping out the original install. I > made it to the reboot prompt, but when I rebooted I was left with... > > Boot has failed, sleeping forever. > > I booted using the rescue CD, mounted the drive, and removed rhgb and quite > from the grub.conf file. The result hinted that a raid device wasn't > detected. The machine only has on SATA drive and it was never setup or used > in a raid configuration. Here's what I see when I try to boot the > machine... > > [drm] DAC-10: set mode 1280x1024 1d > Console: switching to colour frame buffer device 160x64 > [drm] nouveau 0000:01:00.0: 0x121B: parsing clock script 0 > fb0: nouveaufb frame buffer device > registered panic notifier > [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 > dracut: Starting plymouth daemon > dracut: Starting plymouth daemon > dracut: rd_NO_DM: removing DM RAID activation > dracut: rd_NO_DM: removing DM RAID activation > dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids > dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids > Initializing USB Mass Storage driver... > scsi4 : SCSI emulation for USB Mass Storage devices > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > md: bind<sda> > dracut: Assembling MD RAID arrays > dracut: Assembling MD RAID arrays > md: linear personality registered for level -1 > linear: not enough drives present. Aborting' > md: pers->run() failed ... > dracut: mdadm: failed to start array /dev/md/0_0: No such device > dracut: mdadm: failed to start array /dev/md/0_0: No such device > scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-105 1.21 PQ: 0 ANSI: 0 > sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 4:0:0:0: Attached scsi generic sg1 type 5 > dracut: rd-NO_DM: removing DM RAID activation > dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids > dracut: Assembling MD RAID arrays > dracut: mdadm: failed to start array /dev/md/0_0: No such device > > Boot has failed, sleeping forever. > > Any ideas? > Pete > > -- > fedora-list mailing list > [email protected] > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > Guidelines: > http://fedoraproject.org/wiki/Communicate/MailingListGuidelines >
-- fedora-list mailing list [email protected] To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
