In the dialogue box for each separate clef entry is the possibility to set the size for the clef (I think this may be new in Fin2K2) so it is possible to have a 100% clef in one measure and a 50% clef in the next and otherwise mix them.
Robert Patterson wrote: > David Bailey's solution will work, but you might find it easier to input the > clefs as Meas Attached exps. With David's approach, the clefs will not be > full-sized (unless you allow all clef changes to be full-sized.) I can't tell > from your original post whether you want full-sized clefs or clef-change-sized > clefs. > > Another option besides meas-att exps is midmeasure clef changes. Finale will > allow you to insert a moveable mid-measure clef in a bar that already has the > same clef. You can use the "Horizontal Offset" parameter to move it left of the > barline, or else insert it in the previous bar. With midmeasure clefs, you can > change the size percentage to 100%. > > Whichever you choose, you still will have to add the extra bar (as David > suggested) to get the barlines to look right. > > On Wed, 24 April 2002, "David H. Bailey" wrote > > >>It sounds as if you will have to add an empty measure after the double >>bar, create the clef change for the "real" measure which follows the new >>empty measure, set the bar-line to invisible for the new empty measure >>and you will be able to get the result you want. >> >> >>d. collins wrote: >> >> >>>I have a piece in multiple sections, and I want each new section to >>>repeat the clef >>> > > > -- > Robert Patterson > > http://RobertGPatterson.com > > -- David H. Bailey [EMAIL PROTECTED] _______________________________________________ Finale mailing list [EMAIL PROTECTED] http://mail.shsu.edu/mailman/listinfo/finale
