How I always set it up after system upgrades is to print a Configuration page from the printer itself to see what IP address it has on the network. Then use the HP JetDirect connection type and manually enter that IP address. That usually does it for me. Good luck, Thomas
> On May 5, 2019, at 8:40 AM, Johannes Gebauer <[email protected]> > wrote: > > I hope there are still some HP 5000 users here... > > I recently upgraded to Macos Mojave, I had been on a much older version > (Sierra or High Sierra, cannot remember). Ever since I upgraded I cannot get > my HP 5000 to print any more. > > Has anything changed in how it is accessed? Is there anything I can do? > > My HP 5000 is connected via an Ethernet cable to the router, via its J4169A > interface, which seems to have the latest firmware. The printer is seen in > the add printer control panel as a Bonjour printer. I tried both this and the > HP JetDirect - Socket connection. > > I have enabled all available protocols, but the computer doesn't seem to talk > to the printer. Nothing gets printed... > > Any ideas? > _______________________________________________ > Finale mailing list > [email protected] > https://lists.shsu.edu/mailman/listinfo/finale > > To unsubscribe from finale send a message to: > [email protected] _______________________________________________ Finale mailing list [email protected] https://lists.shsu.edu/mailman/listinfo/finale To unsubscribe from finale send a message to: [email protected]
