Hello,
I went through the steps as best I can, 10.6 is already installed so I couldn't
do thins exactly. Unfortunately, I still get the same error.
perl588-core is already installed
If it doesn't like my OS, should I remove fink and then reinstall it? I
presume if I start fresh it won't have any memory of the old system. It'll
take some time but is not difficult.
Francis
On 2011-01-18, at 8:40 AM, Alexander Hansen wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 1/17/11 10:32 PM, Francis Poulin wrote:
>> Hello,
>>
>> I'm trying to update all my packages (after updating my operating system to
>> 10.6). Fink info below:
>>
>> Package manager version: 0.29.17
>> Distribution version: selfupdate-rsync Fri Jan 14 15:24:14 2011, 10.6, i386
>>
>> Unfortunately there are some unmet dependencies. Sometimes I get the
>> message that the files are not fully installed or removed.
>>
>> I tried several things but with no success. This appears to be a known
>> problem but I haven't been able to find the fix. Can someone point me in
>> the right direction?
>>
>> Thanks,
>> Francis
>>
>> ** Trying to update everything **
>>
>> [caernarvon:~] fpoulin% fink update-all
>> Information about 9939 packages read in 1 seconds.
>> The following 177 packages will be installed or updated:
>> atk1 atk1-shlibs automake1.10 avahi avahi-dev bison cairo cairo-shlibs cloog
>> cloog-shlibs cmake cyrus-sasl2-dev cyrus-sasl2-shlibs dbus dbus-dev
>> dbus-shlibs
>> docbook-xsl emacs22 fftw fftw-shlibs fftw3 fftw3-shlibs fontconfig2-dev
>> fontconfig2-shlibs gawk gconf2 gconf2-dev gconf2-shlibs gd2 gd2-shlibs
>> gettext ghostscript
>> glib2-dev glib2-shlibs gnome-icon-theme gnome-mime-data gnome-vfs2-unified
>> gnome-vfs2-unified-dev gnome-vfs2-unified-shlibs gnuplot grace
>> gst-plugins-base-0.10
>> gst-plugins-base-0.10-dev gst-plugins-base-0.10-shlibs gstreamer-0.10
>> gstreamer-0.10-dev gstreamer-0.10-shlibs gtk+2 gtk+2-dev gtk+2-shlibs
>> gtk-doc hdf5 hdf5-bin
>> hdf5-shlibs imagemagick10-dev imagemagick10-shlibs kde4-buildenv lcms
>> lcms-shlibs libavahi-client3-shlibs libavahi-common3-shlibs
>> libavahi-glib1-dev
>> libavahi-glib1-shlibs libbonobo2 libbonobo2-dev libbonobo2-shlibs libcroco3
>> libcroco3-shlibs libcurl4 libcurl4-shlibs libdap6-shlibs libdap8
>> libdap8-shlibs
>> libglade2 libglade2-shlibs libgnomecanvas2 libgnomecanvas2-dev
>> libgnomecanvas2-shlibs libgnomecups-dev libgnomecups-shlibs
>> libgnomeprint2.2-dev
>> libgnomeprint2.2-shlibs libgnomeprintui2.2-dev libgnomeprintui2.2-shlibs
>> libgsf1.114-shlibs libidl2 libidl2-shlibs libidn libidn-shlibs libjasper.1
>> libjasper.1-shlibs libjpeg-shlibs libkpathsea4 libkpathsea4-shlibs libmng2
>> libmng2-shlibs libnc-dap3 libnc-dap3-shlibs liboil-0.3 liboil-0.3-shlibs
>> libpng3
>> libpng3-shlibs librarian.08-shlibs librsvg2 librsvg2-shlibs libssh2.1
>> libssh2.1-shlibs libthai libthai-dev libthai-shlibs libtheora0-shlibs
>> libxml2 libxml2-bin
>> libxml2-py25 libxml2-shlibs ocaml octave openjade openldap23-dev
>> openldap23-shlibs openmotif3 openmotif3-shlibs opensp4 opensp4-dev
>> opensp4-shlibs openssl
>> openssl097-shlibs openssl098-shlibs orbit2 orbit2-dev orbit2-shlibs
>> pango1-xft2-ft219 pango1-xft2-ft219-dev pango1-xft2-ft219-shlibs passwd pcre
>> pcre-shlibs pixman
>> pixman-shlibs pkgconfig plotutils plotutils-dev plotutils-shlibs popt
>> popt-shlibs ppl ppl-shlibs python25 python25-shlibs qt3 qt3-designer
>> qt3-designer-shlibs
>> qt3-doc qt3-linguist qt3-shlibs qt4-x11 qt4-x11-core-shlibs qt4-x11-designer
>> qt4-x11-designer-shlibs qt4-x11-doc qt4-x11-gui-shlibs qt4-x11-linguist
>> qtoctave-x11
>> rarian rarian-compat sdl sdl-shlibs shared-mime-info sqlite3-dev
>> sqlite3-shlibs tcltk tcltk-dev tcltk-shlibs wxgtk2.8 wxgtk2.8-shlibs xft2-dev
>> xml-namespacesupport-pm
>> The following 58 additional packages will be installed:
>> autoconf2.6 automake1.11 automake1.9 crypt-ssleay-pm5100 db44-aes db48-aes
>> dbus-glib1.2-dev dbus-glib1.2-shlibs dbus1.3-dev dbus1.3-shlibs doxygen
>> fontconfig-config gcc44 gcc44-compiler gcc44-shlibs getoptbin
>> gnome-doc-utils html-parser-pm5100 icon-naming-utils intltool40
>> libavahi-core6-shlibs libdap9
>> libdap9-shlibs libgettext3-dev libgsf1.114-dev libjpeg liblzma5-shlibs
>> libmpc2 libmpc2-shlibs libpaper1-dev libpaper1-shlibs libpng14
>> libpng14-shlibs librtmp
>> librtmp-shlibs libtheora0 libtheoradec1-shlibs libtheoraenc1-shlibs
>> libtool14 libwww-pm5100 libxml2-py26 openldap24-dev openldap24-shlibs
>> openmotif4
>> openmotif4-shlibs openssl100-shlibs python26 python26-shlibs pyxml-py26
>> system-openssl-dev uri-pm5100 xft2-shlibs xinitrc xml-parser-pm5100
>> xml-sax-expat-pm5100
>> xml-sax-pm5100 xml-simple-pm5100 xz
>> The following package might be temporarily removed:
>> pcre
>> Do you want to continue? [Y/n]
>> Reading buildlock packages...
>> Could not resolve inconsistent dependencies!
>>
>> Fink isn't sure how to install the above packages safely. You may be able to
>> fix things by running:
>>
>> fink scanpackages
>> sudo apt-get update
>> sudo apt-get install autoconf2.6=2.68-1
>>
>> Failed: Fink::SysState: Could not resolve inconsistent dependencies
>> [caernarvon:~] fpoulin% fink scanpackages
>> Updating the list of locally available binary packages.
>> Scanning dists/local/main/binary-darwin-i386
>> Scanning dists/stable/main/binary-darwin-i386
>> Scanning dists/stable/crypto/binary-darwin-i386
>> Scanning dists/unstable/main/binary-darwin-i386
>> Scanning dists/unstable/crypto/binary-darwin-i386
>> Scanning dists/local/injected/binary-darwin-i386
>> Downloading the indexes of available packages in the binary distribution.
>> /sw/bin/apt-get-lockwait -q update
>> Reading Package Lists...
>> Building Dependency Tree...
>> [caernarvon:~] fpoulin% sudo apt-get update
>> Reading Package Lists... Done
>> Building Dependency Tree... Done
>> [caernarvon:~] fpoulin% sudo apt-get install autoconf2.6=2.68-1
>> Reading Package Lists... Done
>> Building Dependency Tree... Done
>> You might want to run `apt-get -f install' to correct these:
>> Sorry, but the following packages have unmet dependencies:
>> autoconf: Conflicts: autoconf2.6 but 2.68-1 is to be installed
>> autoconf2.6: Conflicts: autoconf but 1:2.63-4 is to be installed
>> xml-sax-expat-pm588: Depends: xml-parser-pm588 but it is not going to be
>> installed
>> xml-sax-pm588: Depends: perl588-core but it is not installable. For Fink
>> users, this often means that you have attempted to install a package from
>> the binary distribution which depends on a "Restrictive" package. See
>> <http://fink.sourceforge.net/faq/usage-fink.php#bindist>,
>> <http://fink.sourceforge.net/doc/users-guide/packages.php#bin-exceptions>
>> Depends: file-temp-pm588 but it is not installable. For Fink
>> users, this often means that you have attempted to install a package from
>> the binary distribution which depends on a "Restrictive" package. See
>> <http://fink.sourceforge.net/faq/usage-fink.php#bindist>,
>> <http://fink.sourceforge.net/doc/users-guide/packages.php#bin-exceptions>
>> E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify
>> a solution).
>>
>>
>> ** trying to install xml separately **
>>
>> sudo apt-get -f install
>
> 'apt-get -f install' often doesn't do the right thing with Fink. The
> message to use it is hardcoded into apt-get.
>
>> Reading Package Lists... Done
>> Building Dependency Tree... Done
>> Correcting dependencies... Done
>> The following packages will be REMOVED:
>> xml-sax-expat-pm588 xml-sax-pm588
>> 0 packages upgraded, 0 newly installed, 2 to remove and 0 not upgraded.
>> 2 packages not fully installed or removed.
>> Need to get 0B of archives. After unpacking 442kB will be freed.
>> Do you want to continue? [Y/n]
>> (Reading database ... 92429 files and directories currently installed.)
>> Removing xml-sax-expat-pm588 ...
>> env: perl5.8.8: No such file or directory
>> /sw/bin/dpkg: error processing xml-sax-expat-pm588 (--remove):
>> subprocess pre-removal script returned error exit status 127
>> env: perl5.8.8: No such file or directory
>> dpkg: error while cleaning up:
>> subprocess post-installation script returned error exit status 127
>> Removing xml-sax-pm588 ...
>> env: perl5.8.8: No such file or directory
>> /sw/bin/dpkg: error processing xml-sax-pm588 (--remove):
>> subprocess pre-removal script returned error exit status 127
>> Errors were encountered while processing:
>> xml-sax-expat-pm588
>> xml-sax-pm588
>> E: Sub-process /sw/bin/dpkg returned an error code (1)
>>
>>
>
> In the 10.6 update instructions,
>
> http://www.finkproject.org/download/10.6-upgrade.php?phpLang=en
>
> we specifically say to install perl588-core as part of the upgrade
> process. The "Depends: perl588-core but it is not installable."
> message is because our apt-get only handles binaries, there isn't an
> official binary distribution for 10.6, and you don't have a
> locally-built version. "fink install perl588-core" should allow you to
> proceed.
>
> - --
> Alexander Hansen, Ph.D.
> Fink User Liaison
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.11 (Darwin)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>
> iEYEARECAAYFAk01mEoACgkQB8UpO3rKjQ9vDgCeNiI1f6WHUrwhjR3p1s7rfnjN
> 29sAnjP/F+7WxhA2wK0FQRcxKH9LD1DV
> =t4p/
> -----END PGP SIGNATURE-----
------------------------------------------------------------------------------
Protect Your Site and Customers from Malware Attacks
Learn about various malware tactics and how to avoid them. Understand
malware threats, the impact they can have on your business, and how you
can protect your company and customers by using code signing.
http://p.sf.net/sfu/oracle-sfdevnl
_______________________________________________
Fink-beginners mailing list
[email protected]
http://news.gmane.org/gmane.os.apple.fink.beginners
