If your PIX is less than a year old, one can always use the trade-in
program with Cisco. If you are going for a bigger and more expensive box.
At 02:35 PM 8/23/00 -0700, Network Operations wrote:
>That will work but it will void your warranty and Cisco wont support it.
>
>Best bet is to get the Cisco nic. One thing ya need to watch out for is
>to make sure you put the nics sequentially in the bus, Eth0 thru Eth3
>or they won't initialize.
>
>I got bit by that one =)
>
>good luck Oscar..
>
>
>
>cheers!
>
>
> >>> Oscar Rau <[EMAIL PROTECTED]> 08/23/00 07:43AM >>>
>Hi,
>
>The PIX system we have only has the inside and outside NICs, which are
>default. If I were buy a 3Com card off the self and use it to connect to
>the DMZ, would that effect PIX in anyway. Would PIX recognize this new
>network HW? Is it something that I have to buy only from Cisco? The difference
>in cost is big $$$. Any advice or exprience appreciated.
>
>TIA.
>--
>
>Oscar Rau
>[EMAIL PROTECTED]
>-
>[To unsubscribe, send mail to [EMAIL PROTECTED] with
>"unsubscribe firewalls" in the body of the message.]
>
>-
>[To unsubscribe, send mail to [EMAIL PROTECTED] with
>"unsubscribe firewalls" in the body of the message.]
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
