Hi, running CP under Microsoft needs the file $FWDIR\state\local.arp for the ARP-Proxy. Which entries did you write in this file? The correct format is IP-Address MAC-Address of externa Interface of FW e.g. 204.32.38.101 00-00-00-00-00-00 If you do so and restart the Firewall, it should work. In addition to that, at the FW you will need a route for the translated address if you configure STATIC NAT. E.g. route add 204.32.38.101 mask 255.255.255.255 10.1.1.1 metric 1 -p So if you have these two points it should work. One more reason for a possible failure is the Anti-Spoofing at the internal Interface. The packets are translated here, so you may have the problems of external IP's at this interface. Hope it helps, best regards Matthias [EMAIL PROTECTED] wrote: > Hi All, > We have configured local.arp file instead of routes for some > specific reasons in checkpoint firewall on windows NT platform. It is not > working properly. Is there any other configuration we need to do to make it > work properly. Apart from creating this file and adding some entries, do we > need to do anything more. Can anyone suggest the exact procedure to do this. > > Thanks & regds., > Babu > - > [To unsubscribe, send mail to [EMAIL PROTECTED] with > "unsubscribe firewalls" in the body of the message.]
begin:vcard n:Leu;Dr. Matthias tel;cell:+49 172 8943533 tel;fax:+49 8102 895 199 tel;work:+49 8102 895 190 x-mozilla-html:FALSE org:AERAsec Network Services and Security GmbH adr:;;Wagenberger Strasse 1;D-85662;Hohenbrunn;; version:2.1 email;internet:[EMAIL PROTECTED] fn:Dr. Matthias Leu end:vcard
