[This message was posted by Abhishek Srivastava of broy <[email protected]> to the "4.0 Session" discussion forum at http://fixprotocol.org/discuss/12. You can reply to it on-line at http://fixprotocol.org/discuss/read/99eac812 - PLEASE DO NOT REPLY BY MAIL.]
> Hi, I noticed the following in your Seq-Reset message header: > "52=1/5/2010 11:13:42" timestamp not in UTC format. > > Apart from this, are you trying to recover a session by sending a > sequence reset? > > As per FIX4.4 Specs, vol-2, Pg-23, the sequence reset (Reset Mode > message should not be used in the scenario you depicted unless it is a > disaster recovery scenario. > > To Quote the specs... "Sequence Reset â Reset should NOT be used as a > normal response to a Resend Request (use Sequence Reset â Gap Fill > mode). The Sequence Reset â Reset should ONLY be used to recover from a > disaster situation which cannot be recovered via the use of Sequence > Reset â Gap Fill. Note that the use of Sequence Reset â Reset may result > in the possibility of lost messages." > > Regards, Bivas > > > LP server send me resend request to send messages( check tag 7 & > > Tag 16 ) > > > > 8=FIX.4.49=8135=249=blabla56=blabla34=138852=20100105- > > 05:43:34.1477=8716=010=083 > > > > I sent sequence reset-reset mode(not gapfill) higher than expected seq > > num (plz chaeck tag 36) > > > > 8=FIX.4.49=5235=449=blabla56=blabla34=8743=Y52=1/5/2010 > > 11:13:42123=N36=9110=33 > > > > but they again gives resend request > > > > 8=FIX.4.49=8135=249=blabla56=blabla34=138952=20100105- > > 05:43:41.8817=8716=010=087 > > > > How to handle this situation? Thanks in advance. I have also send gapfill message with new seq num=1(short seqnum) and high seqnum(for e.g. 200) but they again gives resend request one less than before i.e. from 7=88 to 16=0 [You can unsubscribe from this discussion group by sending a message to mailto:[email protected]]
-- You received this message because you are subscribed to the Google Groups "Financial Information eXchange" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/fix-protocol?hl=en.
