[This message was posted by Jörg Thönnes of MACD Macdonald Associates <[email protected]> to the "4.3 Changes" discussion forum at http://fixprotocol.org/discuss/2. You can reply to it on-line at http://fixprotocol.org/discuss/read/0c76e8fd - PLEASE DO NOT REPLY BY MAIL.]
Furthermore, I recommend to experiment a bit with a real FIX engine. QuickFIX and QuickFIX/J are examples of open source implementations, they also contain example apps. Cheers, Jörg > Igor, > I think there may be 2 issues in this logon: > 1) tag 9 should be the bytes from the tag 35 to the beginning of tag 10. > Example: > 8=FIX.4.2^A9=52^A35=0^A34=827^A49=AMEX^A56=EZX^A52=20101230-09:02:51.811^A10=087^A > 2) And I'm not sure about this one, but is there a Ctrl-A after tag 10? Most > likely issue 1 is causing the other side to keep reading waiting for more > characters and therefore you get no response. > If you want I could give you a FIX engine on our end to connect to and I > could look at what exactly you are sending that might explain the lack of > response. > Paul > > > Hello dear all , > > I wrote a simple c# program sending a fix login message to FIX-server(demo > > mode, w/o encryption). > > I've created in programm a instanse socket (IPEndPoint,Srteam,TCP) , made a > > connect to FIX-server, connected... > > than send created a the fix login message : > > > > "8=FIX.4.3 9=138 35=A 34=1 49=****_TEST 56=**TEST 50=FX 98=0 108=30 141=Y > > 553=*** 554=*** 1=**** 464=Y 52=20101230-14:00:49 10=084 " > > 35=A for login message > > 49=sendcompid > > 56=targetcompid > > 52=sending time > > heartbeats (tag 108) same by FIX-server (30) > > 98=0 means no encryptionmethod > > I was make this string into byte[]-array, than sent to FIX-server > > socket.send(byte[]) , and i didn't get any response data from FIX-server, > > where is my error? > > > > please help me a direction where to start? > > Best regards [You can unsubscribe from this discussion group by sending a message to mailto:[email protected]] -- You received this message because you are subscribed to the Google Groups "Financial Information eXchange" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/fix-protocol?hl=en.
