Let's just hope your client is not on this list as well ;)
At 02:24 PM 11/25/2005, you wrote:
Thanks to everyone who replied, The problem seems to have been solved - at least for now... I had asked the client yesterday to try and reburn the cd-rom from her mac, to see if maybe something had gone wrong with the burning process. As I mentioned, the last cd-rom I sent her was working fine. She hadn't come back to me about that, and even sent me an annoyed email that had no mention of it. So I was fairly sure that failed. So Just now I called her to get some more info and talk her through a test that would see if Robin's theory about the swfs was the cause of the problem (although I do check for initialization, something might have slipped through on a slower system)... And she says "Oh yeah, I reburnt the cd-rom on the mac and it's working just fine on the pc". Grrr... Clients! Thanks! Karina > -----Original Message----- > From: Robin Burrer [mailto:[EMAIL PROTECTED] > Sent: 24 November 2005 23:39 > To: Flashcoders mailing list > Subject: RE: [Flashcoders] Flvs fail to stream on an older pc > > Hi Karina > > Yes there's always will be a system which will cause problems. > (It's just a bit annoying though when it happens on your > client's commuter) > > The CD-ROM should however run even on very slow system. > > >> application loads various swfs into a base swf file, and > the flvs are > >> >>loaded > > If you use multiple swf in your CD-ROM make sure that all > swfs are initialized before you use them. For example I once > was working on a CD where loaded a swf with a nested swf/flv > player in my root swf. > > After loading the swf file I sent the video url to the loaded > swf file so that the nested component in the swf could play it. > > This all worked fine when I tested it on my computer and on > another computer. However it didn't work on some computers > even if they had fast processors. > > Eventually I found out that it was the CD-ROM drive. Some > drives were just a bit too slow. So the swf file which > contained the video player component was not loaded fast enough. > > As a result the url send from the main movie did never reach > the player in the loaded swf. The solution is quite easy > though. Whenever you use multiple swf files in your CD-ROM > project and you want them to communicate between each other > make sure that loaded swf file is initialized properly before > you send anything. > > A bulletproof way to do this is to have interval function in > your main movie which checks the value of a variable in your > loaded swf. > > e.g: > > > // load the swf > swfHolderMc.loadMovie("someSwf.swf"); > > intervalId = setInterval(this, "executeCallback", 200); > > function executeCallback() > { > If (swfHolderMc.getInicialized())// obviously you need > a //getInicialized function in the swf > file which is loaded > > { > // do something in the loaded swf > clearInterval(intervalId); > } > > } > > > > Hope this helps > > > Robin > > > > > > > > > > > > > > However > > > > Most of the times it is a faulty driver or some wired configuration. > > I think these days it is not really necessary > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Søren Christensen > Sent: Friday, 25 November 2005 9:54 AM > To: Flashcoders mailing list > Subject: Re: [Flashcoders] Flvs fail to stream on an older pc > > > Hi Karina > > I have had similar problems like you. > > My cd-rom in question had 2 videos (both external flvs to > profit f7's smaller memory footprint advantage over f6 > regarding videos) Both videos was rather big in pixel size > and approx 3 mins length (about 30 megabytes each). So i knew > they would demand a bit of 'juice'. > > When testing with a 'raw' video test both a mac g4 500mhz > (os9 and osx) and a p3 600mhz (both win2k + win 98) worked > fine with no performance problems playing from a cd. > > But my version with the final design was demanding quite alot > more cpu to perform well. > What i found out was that the pure presence of bitmap > graphics with alpha information was decreasing the > performance (demanding more cpu) - even though the bitmap > wasn't moving or something was moving over or under it. > > I still couldn't optimize it fully to fit my 'raw' tests - > but it put down the performance needs to a acceptable level. > My minimum specs ended up at mac: g4 800mhz pc: p3 800mhz > (both 64mb ram) > > I had other strange problems like sound issues with some pcs > - some dell configurations with sound blaster live soundcards > and a certain motherboards and cd-rom drive for some reason > distorted the sound. (similar to the sound issues with flash > 5 and soundblaster pci 64 and 128) but thing like this is out > of your hands. > But well with cd-rom productions there always are some odd hw > configurations that just give problems (although in theory it > shouldn't). > Using director would just giver other issues (and make the > production a lot more expensive due to the lack of cross > platform projector exporting back then). Flash gave us the > unique feature to distribute video cross platform without > being dependent of 3rd party media players. > All in all the cd-rom was a success and went into its 2 > edition with a total of 70.000 units. > > Cheers, > >B) Søren > > > > > DESIGN // INTERACTIVITY // MOTION // VISUALS > +34 667 812 329 (ES) // +45 3694 8614 (DK) > www.RGBAZ.com // www.DESILENCE.net > > > > > > On 24/11/05 17:26, "Karina Steffens" <[EMAIL PROTECTED]> wrote: > > > Hi List, > > > > I'm on the last stages of development of an educational CD-Rom in > > FlashMX 2004. The application uses a v2 media component > loads flvs from the CD-Rom. > > It's been developed on a pc (XP) and then zipped over and burned on > > the Mac > > (OSX) and set to the client. > > > > The client has an old mac and an even older PC (which still uses > > windows 98...). The CD-Rom loads on both, but the flvs seem > to work on > > her mac but not on the pc (except for one or two). She also > says that > > an earlier version of the CD-Rom that I sent her does work, > which is > > puzzling. Also, there is a little test utility just for the Flvs on > > the CD-Rom, and that also works. My application loads various swfs > > into a base swf file, and the flvs are loaded to that, so > it could be a memory thing. > > > > I can't run any of the tests myself, because I'm based in > Dublin and > > she is in London, so I don't know what to do. I tried to > tell her that > > her PC is just too old for the software, and I still > haven't got any > > data from her about how much memory it has. She's not very > technical. > > > > Does anyone have any ideas, solutions or minimum specs for > this problem? > > > > Thanks, > > Karina > > > > > > > > Karina Steffens | Neo-Archaic > > creative & technical new media design > > <http://www.neo-archaic.net/> www.neo-archaic.net > > > > _______________________________________________ > > Flashcoders mailing list > > [email protected] > > http://chattyfig.figleaf.com/mailman/listinfo/flashcoders > > > _______________________________________________ > Flashcoders mailing list > [email protected] > http://chattyfig.figleaf.com/mailman/listinfo/flashcoders > _______________________________________________ > Flashcoders mailing list > [email protected] > http://chattyfig.figleaf.com/mailman/listinfo/flashcoders > > _______________________________________________ Flashcoders mailing list [email protected] http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
_______________________________________________ Flashcoders mailing list [email protected] http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
