Hello, I'm wanting to upgrade the BIOS on an older machine that I have. A Sony Vaio (PCV-RX650(UC)), with an ASUSTeK mother board (P4B266LM Rev: 1.xx), running Linux kernel 2.6.28.
Running flashrom (today's trunk version) with no arguments gives this: flashrom v0.9.1-runknown No coreboot table found. Found chipset "Intel ICH2", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF002A/B" (256 KB, FWH) at physical address 0xfffc0000. No operations were specified. I saved a copy of my existing BIOS image with: flashrom -r original_bios.bin That appears to work, as the file is the same size as the updated BIOS .bin file I downloaded from the vendor's site. To test writing, I attempted to write the original BIOS image back with flashrom -w original_bios.bin, and here is the output: flashrom v0.9.1-runknown No coreboot table found. Found chipset "Intel ICH2", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF002A/B" (256 KB, FWH) at physical address 0xfffc0000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x25, failed byte count from 0x00000000-0x00003fff: 0x3fa4 ERASE FAILED! ERASE FAILED! ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail [email protected] ------------------------------------------------------------ DO NOT REBOOT OR POWEROFF! If I do a flashrom -v original_bios.bin, I get: flashrom v0.9.1-runknown No coreboot table found. Found chipset "Intel ICH2", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF002A/B" (256 KB, FWH) at physical address 0xfffc0000. Flash image seems to be a legacy BIOS. Disabling checks. Verifying flash... VERIFIED. And reading a second copy and doing a binary diff shows no differences, so my BIOS checks out as not being damaged. (At least, I think so.) So, any advice on what to look for/change to make this work? Thanks. --Allan _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
