On Wed, Jan 13, 2010 at 06:40:57PM +0100, Michael Karcher wrote: > Hello flashrom developers, > > (obtained from reversing the vendor update tool) > > Supported IDs (names stolen from pci.ids, the double 372N is not my > fault): > 1103:0004 HPT366/368/370/370A/372/372N > 1103:0005 HPT372A/372N > 1103:0006 HPT302/302N > > Flash enable at 58L.24 (setpci syntax), set to enable flash writing > Flash interface select at 70B, 1 = mmapped in ROM addr space, > 0 = io mapped > > IO-mapped access: > (BAR4)+0x90 -> DWORD Address > (BAR4)+0x94 -> BYTE/WORD/DWORD data access. > > memmapped chip access was not shown in the tool, but the flash disable > code disables the extension ROM BAR. So probably its just mmapped > read/write in that area. Maximum Chip size supported by the vendor tool: > 128K
Great, thanks! I'll post a patch tomorrow or so and test on my HPT370A. Uwe. -- http://www.hermann-uwe.de | http://www.randomprojects.org http://www.crazy-hacks.org | http://www.unmaintained-free-software.org _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
