I guess that was done wrong before, but all chips touched like that
need to be changed back to untested unless you retested each of them.
Otherwise the test flags become quite meaningless...
Stefan
On 23.01.2010, at 23:56, Sean Nelson <[email protected]> wrote:
Complete the addition of Feature Bits for all Jedec based chips.
Add Zero entries for FWH, SPI and "Odd Jedec" (FEATURE_ADDR_SHIFTED)
chips.
Add FEATURE_SHORT_RESET
fix feature_bits to 0 for SST49LF040B
rewrite jedec functions to use getaddrmask
convert write_49f002 to write_jedec_1
convert write_w39v040c to write_jedec_1
convert probe_w39v040c to probe_jedec
convert write_49lf040 to write_jedec_1
convert write_pm29f002 to write_jedec
convert write_29f040b to write_jedec_1
convert probe_29f040b to probe_jedec
convert erase_chip_29f040b to erase_chip_block_jedec
convert erase_sector_29f040b to erase_sector_jedec
convert write_m29f002b to write_jedec
convert write_m29f002t to write_jedec
convert *_29f002 to *_jedec
decouple unused files from Makefile:
am29f040b.c
en29f002a.c
m29f002.c
mx29f002.c
pm29f002.c
sst49lf040.c
w39v040c.c
w49f002u.c
Updated patch with suggestions and fixes from carldani and uwe.
Signed-off-by: Sean Nelson <[email protected]>
<feature_bits.diff>
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
