On Thu, May 27, 2010 at 07:21:33PM -0700, Kyle Kienapfel wrote: > Is probing the flash/eeprom something thats not done yet for rtl8139's? > > r...@grayskull:~# flashrom -p nicrealtek > flashrom v0.9.2-r1015 on Linux 2.6.17 (i686), built with libpci 3.0.0, > GCC 4.4.3, little endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OK. > Found "Realtek RTL8139/8139C/8139C+" (10ec:8139, BDF 02:0a.0). > No EEPROM/flash device found. > Note: flashrom can never write if the flash chip isn't found automatically. > > I ran an strace on flashrom and just before it says theres no flash > device it reads /sys/bus/pci/devices/0000\:02\:0a.0/config is this the > contents of the eeprom where the bootrom size is configured? > > forcing a read works > flashrom -p nicrealtek -f -r file -c SST29EE010
Can you post the output of "flashrom -p nicrealtek -VVVV" please? Have you checked that the file you read via forcing really contains data that makes sense (i.e. it's not just all-0xff or all-0x00)? Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
