Am Mittwoch, den 21.07.2010, 12:09 +0200 schrieb Carl-Daniel Hailfinger: > New version. Rename to rayer_spi. Add a manpage entry. > > Add support for RayeR SPIPGM hardware as described in > http://rayer.ic.cz/elektro/spipgm.htm > > To use the RayeR driver, run > flashrom -p rayer_spi -V > > Known bugs/limitations: > - Won't compile/work on non-x86 architectures. > - Will always use direct port I/O access. > > Log follows: > > flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC > 4.3.2, little endian > Calibrating delay loop... OK. > Initializing rayer_bitbang_spi programmer > Using port 0x378 as I/O base for parallel port access. > ... > Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 > 0xc2, id2 0x2015 > ... > Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address > 0xffe00000. > ... > No operations were specified. > > Signed-off-by: Carl-Daniel Hailfinger <[email protected]> > Acked-by: Martin Rehak <[email protected]> Looks good.
Acked-by: Michael Karcher <[email protected]> Regards, Michael Karcher _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
