On 21.07.2010 12:15, Michael Karcher wrote: > Am Mittwoch, den 21.07.2010, 12:09 +0200 schrieb Carl-Daniel Hailfinger: > >> New version. Rename to rayer_spi. Add a manpage entry. >> >> Add support for RayeR SPIPGM hardware as described in >> http://rayer.ic.cz/elektro/spipgm.htm >> >> To use the RayeR driver, run >> flashrom -p rayer_spi -V >> >> Known bugs/limitations: >> - Won't compile/work on non-x86 architectures. >> - Will always use direct port I/O access. >> >> Log follows: >> >> flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC >> 4.3.2, little endian >> Calibrating delay loop... OK. >> Initializing rayer_bitbang_spi programmer >> Using port 0x378 as I/O base for parallel port access. >> ... >> Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 >> 0xc2, id2 0x2015 >> ... >> Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address >> 0xffe00000. >> ... >> No operations were specified. >> >> Signed-off-by: Carl-Daniel Hailfinger <[email protected]> >> Acked-by: Martin Rehak <[email protected]> >> > Looks good. > > Acked-by: Michael Karcher <[email protected]> >
Thanks, committed in r1093. Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
