Please use "reply to all" in the future. Thanks. 2011/4/19 Cyrille Bartholomée <[email protected]> > > Dear Idwer, > > First of all thank you for responding so fast and trying to help me!
First of all: DO NOT REBOOT OR POWEROFF YOUR LAPTOP. > > 1. Downloaded and built latest flashrom. Problem remains exactly the same as > with previous version. That is good and not so good. > 2. I am using an Asus laptop model M6Ne, the exact type of board I don't know. flashrom doesn't really support laptops. However, adding support *is* possible but requires a lot of work. http://flashrom.org/Supported_hardware#Supported_laptops.2Fnotebooks http://flashrom.org/Laptops > > 3. I have run the commands you mentioned, the results are attached to this > mail. This information is not sane, it should say (and we detect it as such) "Laptop" or "Notebook": DMI string chassis-type: "<OUT OF SPEC>" Don't worry, this is not your fault. > > If there is more information you need, please let me know. DO NOT REBOOT OR POWEROFF YOUR LAPTOP. I have uploaded the content of the files you have attached. flashrom -V: http://paste.flashrom.org/view.php?id=493 lspci -nnvvvxxx: http://paste.flashrom.org/view.php?id=494 superiotool -deV: http://paste.flashrom.org/view.php?id=495 > > Again, thanks for your help. > > Kind regards, > > Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen > > t. 0032 3 298 4244 | m. 0032 499 711 018 | e. [email protected] > > Op dinsdag 19 april 2011 00:21:28 schreef u: > > > 2011/4/18 Cyrille Bartholomée <[email protected]>: > > > > Dear, > > > > > > > > I'm facing this problem when flashing my rom: > > > > > > > > flashrom v0.9.2-r1028 on Linux 2.6.35-28-generic (i686), built with libpci > > > > 3.0.0, GCC 4.4.4, little endian > > > > > > > > flashrom is free software, get the source code at http://www.flashrom.org > > > > > > > > Calibrating delay loop... delay loop is unreliable, trying to continue OK. > > > > > > > > No coreboot table found. > > > > > > > > Found chipset "Intel ICH4-M", enabling flash write... OK. > > > > > > > > This chipset supports the following protocols: Non-SPI. > > > > > > > > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address > > > 0xfff80000. > > > > > > > > Flash image seems to be a legacy BIOS. Disabling checks. > > > > > > > > Writing flash chip... Erasing flash chip... ERASE FAILED at 0x00000008! > > > > Expected=0xff, Read=0x00, failed byte count from 0x00000000-0x00000fff: > > > > 0xfc5 > > > > > > > > ERASE FAILED! > > > > > > > > ERASE FAILED at 0x00000008! Expected=0xff, Read=0x00, failed byte count > > > from > > > > 0x00000000-0x0000ffff: 0xfadb > > > > > > > > ERASE FAILED! > > > > > > > > FAILED! > > > > > > > > ERASE FAILED! > > > > > > > > FAILED! > > > > > > > > Your flash chip is in an unknown state. > > > > > > > > Get help on IRC at irc.freenode.net (channel #flashrom) or > > > > > > > > mail [email protected]! > > > > > > Can you: > > > - try a newer release (or build the latest developemt code yourself > > > http://www.flashrom.org/Downloads#Installation_from_source) > > > - mention the exact name of your board (including revision, if there > > > are multiple revisions) > > > - attach the output of 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool > > > -deV' (run all commands as root) > > > > > > > > > Thanks in advance, > > > Idwer > > > > > > > > > > > ------------------------------------------------------------------------------- > > > > > > > > DO NOT REBOOT OR POWEROFF! > > > > > > > > Regards, > > > > > > > > Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen > > > > > > > > t. 0032 3 298 4244 | m. 0032 499 711 018 | e. [email protected] > > > > > > > > _______________________________________________ > > > > flashrom mailing list > > > > [email protected] > > > > http://www.flashrom.org/mailman/listinfo/flashrom > > > > > > > _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
