2011/4/19 Cyrille Bartholomée <[email protected]>: > Sorry for not using "reply to all. > > I've attached the output of dmesg to this mail. > > Hope you can help me further on this issue.
Hi, This at first doesn't look good: [38306.942453] flashrom[11711]: segfault at 0 ip (null) sp bfacc5cc error 4 in libpci.so.3.1.7[2b7000+9000] Is your laptop still powered on and are you close to it ? Can you run "gdb --args ./flashrom -V -w <file_you_want_to_write>" (as root) and copy the output ? You then should see this lines of text, the commands are after the closing parentheses: (gdb) run // lots of text (gdb) bt // some more text, this is the relevant part Are you able (and willing) to join IRC, irc://irc.freenode.net/#flashrom ? > > Kind regards, > > Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen > > t. 0032 3 298 4244 | m. 0032 499 711 018 | e. [email protected] > > Op dinsdag 19 april 2011 12:29:22 schreef Idwer Vollering: > >> Please use "reply to all" in the future. Thanks. > >> > >> 2011/4/19 Cyrille Bartholomée <[email protected]>: > >> > Dear Idwer, > >> > > >> > Just built checkout from svn. It outputs this result: > >> > >> Again: DO NOT REBOOT OR POWEROFF YOUR LAPTOP.I' > >> > >> > > >> > flashrom v0.9.3-r1288 on Linux 2.6.35-28-generic (i686), built with >> > libpci > >> > 3.1.7, GCC 4.4.5, little endian > >> > > >> > flashrom is free software, get the source code at >> > http://www.flashrom.org > >> > > >> > Calibrating delay loop... delay loop is unreliable, trying to continue >> > OK. > >> > > >> > Found chipset "Intel ICH4-M", enabling flash write... OK. > >> > > >> > This chipset supports the following protocols: FWH. > >> > > >> > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address >> > 0xfff80000. > >> > > >> > Flash image seems to be a legacy BIOS. Disabling checks. > >> > > >> > Erasing and writing flash chip... ERASE FAILED at 0x00016000! >> > Expected=0xff, > >> > Read=0xae, failed byte count from 0x00016000-0x00016fff: 0xfde > >> > > >> > ERASE FAILED! > >> > > >> > ERASE FAILED at 0x00010000! Expected=0xff, Read=0xca, failed byte count >> > from > >> > 0x00010000-0x0001ffff: 0xfeb2 > >> > > >> > ERASE FAILED! > >> > > >> > Segmentatiefout > >> > > >> > Segmentatiefout=segmentation error > >> > >> flashrom should NOT have segfaulted. Can you show the last lines of > >> dmesg (dmesg | tail) ? > >> > >> > > >> > Maybe this information can help you? > >> > > >> > Regards, > >> > > >> > Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen > >> > > >> > t. 0032 3 298 4244 | m. 0032 499 711 018 | e. [email protected] > >> > > >> > Op dinsdag 19 april 2011 07:25:59 schreef Cyrille Bartholomée: > >> > > >> >> Dear Idwer, > >> > > >> >> > >> > > >> >> > >> > > >> >> First of all thank you for responding so fast and trying to help me! > >> > > >> >> > >> > > >> >> 1. Downloaded and built latest flashrom. Problem remains exactly the >> >> same > >> >> as with previous version. > >> > > >> >> 2. I am using an Asus laptop model M6Ne, the exact type of board I >> >> don't > >> >> know. > >> > > >> >> 3. I have run the commands you mentioned, the results are attached to >> >> this > >> >> mail. > >> > > >> >> > >> > > >> >> If there is more information you need, please let me know. > >> > > >> >> > >> > > >> >> Again, thanks for your help. > >> > > >> >> > >> > > >> >> > >> > > >> >> Kind regards, > >> > > >> >> > >> > > >> >> Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen > >> > > >> >> t. 0032 3 298 4244 | m. 0032 499 711 018 | e. [email protected] > >> > > >> >> > >> > > >> >> Op dinsdag 19 april 2011 00:21:28 schreef u: > >> > > >> >> > 2011/4/18 Cyrille Bartholomée <[email protected]>: > >> > > >> >> > > Dear, > >> > > >> >> > > > >> > > >> >> > > I'm facing this problem when flashing my rom: > >> > > >> >> > > > >> > > >> >> > > flashrom v0.9.2-r1028 on Linux 2.6.35-28-generic (i686), built with > >> >> > > libpci > >> > > >> >> > > 3.0.0, GCC 4.4.4, little endian > >> > > >> >> > > > >> > > >> >> > > flashrom is free software, get the source code at > >> >> > > http://www.flashrom.org > >> > > >> >> > > > >> > > >> >> > > Calibrating delay loop... delay loop is unreliable, trying to >> >> > > continue > >> >> > > OK. > >> > > >> >> > > > >> > > >> >> > > No coreboot table found. > >> > > >> >> > > > >> > > >> >> > > Found chipset "Intel ICH4-M", enabling flash write... OK. > >> > > >> >> > > > >> > > >> >> > > This chipset supports the following protocols: Non-SPI. > >> > > >> >> > > > >> > > >> >> > > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address > >> >> > > 0xfff80000. > >> > > >> >> > > > >> > > >> >> > > Flash image seems to be a legacy BIOS. Disabling checks. > >> > > >> >> > > > >> > > >> >> > > Writing flash chip... Erasing flash chip... ERASE FAILED at > >> >> > > 0x00000008! > >> > > >> >> > > Expected=0xff, Read=0x00, failed byte count from > >> >> > > 0x00000000-0x00000fff: > >> > > >> >> > > 0xfc5 > >> > > >> >> > > > >> > > >> >> > > ERASE FAILED! > >> > > >> >> > > > >> > > >> >> > > ERASE FAILED at 0x00000008! Expected=0xff, Read=0x00, failed byte > >> >> > > count from > >> > > >> >> > > 0x00000000-0x0000ffff: 0xfadb > >> > > >> >> > > > >> > > >> >> > > ERASE FAILED! > >> > > >> >> > > > >> > > >> >> > > FAILED! > >> > > >> >> > > > >> > > >> >> > > ERASE FAILED! > >> > > >> >> > > > >> > > >> >> > > FAILED! > >> > > >> >> > > > >> > > >> >> > > Your flash chip is in an unknown state. > >> > > >> >> > > > >> > > >> >> > > Get help on IRC at irc.freenode.net (channel #flashrom) or > >> > > >> >> > > > >> > > >> >> > > mail [email protected]! > >> > > >> >> > > >> > > >> >> > Can you: > >> > > >> >> > - try a newer release (or build the latest developemt code yourself > >> > > >> >> > http://www.flashrom.org/Downloads#Installation_from_source) > >> > > >> >> > - mention the exact name of your board (including revision, if there > >> > > >> >> > are multiple revisions) > >> > > >> >> > - attach the output of 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool > >> > > >> >> > -deV' (run all commands as root) > >> > > >> >> > > >> > > >> >> > > >> > > >> >> > Thanks in advance, > >> > > >> >> > Idwer > >> > > >> >> > > >> > > >> >> > > > >> > > >> >> > > > >> >> > > >> >> > > ------------------------------------------------------------------------------- > >> > > >> >> > > > >> > > >> >> > > DO NOT REBOOT OR POWEROFF! > >> > > >> >> > > > >> > > >> >> > > Regards, > >> > > >> >> > > > >> > > >> >> > > Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen > >> > > >> >> > > > >> > > >> >> > > t. 0032 3 298 4244 | m. 0032 499 711 018 | e. >> >> > > [email protected] > >> > > >> >> > > > >> > > >> >> > > _______________________________________________ > >> > > >> >> > > flashrom mailing list > >> > > >> >> > > [email protected] > >> > > >> >> > > http://www.flashrom.org/mailman/listinfo/flashrom > >> > > >> >> > > > >> > > >> >> > > >> > > >> >> > >> _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
