On 2011.06.02 12:27, Idwer Vollering wrote:
Can you re-send your patch with a sign-off?
http://www.coreboot.org/Development_Guidelines#Sign-off_Procedure
My bad. Here you go:
The following patch adds support for the FT2232D based Olimex
ARM-USB-TINY JTAG programmer [1].
Signed-off-by: Pete Batard <pbatard at gmail.com>
Regards,
/Pete
Index: ft2232_spi.c
===================================================================
--- ft2232_spi.c (revision 1322)
+++ ft2232_spi.c (working copy)
@@ -38,6 +38,9 @@
#define FIC_VID 0x1457
#define OPENMOKO_DBGBOARD_PID 0x5118
+#define OLIMEX_VID 0x15BA
+#define OLIMEX_ARM_USB_TINY_PID 0x0004
+
const struct usbdev_status devs_ft2232spi[] = {
{FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"},
{FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"},
@@ -45,6 +48,7 @@
{FIC_VID, OPENMOKO_DBGBOARD_PID, OK,
"First International Computer, Inc.",
"OpenMoko Neo1973 Debug board (V2+)"},
+ {OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, OK, "Olimex", "ARM-USB-TINY"},
{},
};
@@ -167,6 +171,10 @@
ft2232_vid = FIC_VID;
ft2232_type = OPENMOKO_DBGBOARD_PID;
ft2232_interface = INTERFACE_A;
+ } else if (!strcasecmp(arg, "usbtiny")) {
+ ft2232_vid = OLIMEX_VID;
+ ft2232_type = OLIMEX_ARM_USB_TINY_PID;
+ ft2232_interface = INTERFACE_A;
} else {
msg_perr("Error: Invalid device type specified.\n");
free(arg);
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
