Do you mean that both of the rdid probes should have returned the same value? I'll have to find a way to make sure the flashrom is healthy and properly connected. Thank you for your time!
On 02 Jun 2011, at 23:49, Stefan Tauner wrote: > On Thu, 2 Jun 2011 23:32:18 +0200 > David Kiers <[email protected]> wrote: > >> oops: >> dk@dk-AOA150:~$ flashrom -p buspirate_spi:dev=/dev/ttyUSB0, -V >> […] >> Probing for PMC unknown PMC SPI chip, 0 kB: RDID byte 0 parity violation. >> probe_spi_rdid_generic: id1 0xff, id2 0xffff >> Probing for SST unknown SST SPI chip, 0 kB: RDID byte 0 parity violation. >> probe_spi_rdid_generic: id1 0x00, id2 0x00 > > assuming that the buspirate itself and flashrom work correctly, you get > either "all 1s" or "all 0s" on the miso pin for the same command. this > clearly indicates a hardware problem. > -- > Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
