On Sun, 21 Aug 2011 08:40:54 -0600 Donovan Lavinder <[email protected]> wrote:
> > here's the log: > > ;root@sysresccd /root % flashrom > ;flashrom v0.9.3-r1205 on Linux 2.6.38-std230-i586 (i686), built with libpci > 3.1. > ;7, GCC 4.4.5, little endian > ;flashrom is free software, get the source code at http://www.flashrom.org > ; > ; > ;Calibrating delay loop... OK. > ;coreboot table found at 0x6fffe000. > ;Found ITE Super I/O, ID 0x8718. > ;Found Chipset "AMD SB700/SB710/SB750", enabling flash write... OK. > ;This chipset supports the following protocols: LPC,FWH,SPI. > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ;4 byte RDID not supported on this SPI controller > ; > > After that, that's it.... > a verbose one (with -V or even -VVV) please i am not familiar with the it87xx code, but i would say it hangs in the while loop at the end of it8716f_spi_send_command. it would be easy to add a timeout there, but the question is why it does hang there (now). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
