Alright, will do. On Sun, Aug 21, 2011 at 1:24 PM, Stefan Tauner < [email protected]> wrote:
> On Sun, 21 Aug 2011 08:40:54 -0600 > Donovan Lavinder <[email protected]> wrote: > > > > here's the log: > > > > ;root@sysresccd /root % flashrom > > ;flashrom v0.9.3-r1205 on Linux 2.6.38-std230-i586 (i686), built with > libpci > > 3.1. > > ;7, GCC 4.4.5, little endian > > ;flashrom is free software, get the source code at > http://www.flashrom.org > > ; > > ; > > ;Calibrating delay loop... OK. > > ;coreboot table found at 0x6fffe000. > > ;Found ITE Super I/O, ID 0x8718. > > ;Found Chipset "AMD SB700/SB710/SB750", enabling flash write... OK. > > ;This chipset supports the following protocols: LPC,FWH,SPI. > > ;4 byte RDID not supported on this SPI controller > > ;4 byte RDID not supported on this SPI controller > > ;4 byte RDID not supported on this SPI controller > > ;4 byte RDID not supported on this SPI controller > > ;4 byte RDID not supported on this SPI controller > > ;4 byte RDID not supported on this SPI controller > > ;4 byte RDID not supported on this SPI controller > > ;4 byte RDID not supported on this SPI controller > > ;4 byte RDID not supported on this SPI controller > > ;4 byte RDID not supported on this SPI controller > > ;4 byte RDID not supported on this SPI controller > > ; > > > > After that, that's it.... > > > > a verbose one (with -V or even -VVV) please > i am not familiar with the it87xx code, but i would say it hangs in the > while loop at the end of it8716f_spi_send_command. it would be easy to > add a timeout there, but the question is why it does hang there (now). > > -- > Kind regards/Mit freundlichen Grüßen, Stefan Tauner > -- "Mamma-mia, there's Koopa troopa in Mushroom Kingdom!"
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
